Manual Tristar SZ 1911 (page 5 of 37) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish)

457534

Zoom out

Zoom in

1/37

Operation and maintenance

Remove all packaging of the device.

Check if the voltage of the appliance corresponds to the main voltage of your home.

Rated voltage : AC220-240V 50Hz.

This vacuum is not designed to collect liquids and sharp items. Never vacuum hot ashes,

make sure it is fully cooled.

First use

Place the hose (with the side of the hose coupling) in front of the vacuum, if you hear a click,

this just confirmed. Place the vacuum foot on the telescope tube, the telescope tube length can

be made, according to your wishes, by pressing the button down and push the tube to extend

or reduce. The maximum length setting of the tube is 94 cm. To disconnect the hose press the

button of the hose coupling. Use the button on the vacuum foot to the desired position, with or

without a brush on the bottom of the suction foot.

Always make sure that all the filters and the dust bag are correctly fitted before using the

appliance. Damaged or incorrectly fitted filters or dust bag may cause damage to the appliance.

Use

Pull the power cord totally from the vacuum cleaner and place it into a wall outlet. Press the

on/off switch (no. 4) to start your vacuum cleaner.

The suction power regulator (no.5) controls the suction if it should be temporarily reduced.

To turn the unit off, press the on/off switch. Unplug the power cord and press the cable rewind

button (no. 6). You can use the storage clip at the back of the device to store the vacuum bar

when you store the vacuum cleaner.

Cleaning and maintenance of the device

Always remove the plug from the outlet when the device is not used, the filters are cleaned or

the dust bag will be replaced.

Replace of the dust bag.

You need to replace the dust bag when the dust bag full indicator (no 3) lights.

Do this immediately otherwise it loses much suction power.

Disconnect the hose from the hose connection (no 2).

Open the unit by pressing the handle for opening dust

bag compartment (no 1). The valve is open, see step 1

in the drawing

Turn up the dust bag holder, see step 2

in the drawing. Pull the bag up from the dust bag

holder, see step 3 in the drawing. Place a new bag in

the holder and press it down. Close the lid of the

compartment and torque the hose to the hose

connection.

Cleaning of the filters.

To ensure the best suction of the vacuum cleaner, you should clean the filters at the top (the

exhaust filter) and behind the bag (inlet filter) regularly.

Cleaning the inlet-filter

Disconnect the hose from the hose connection (no 2). Open the unit by pressing the handle for

opening dust bag compartment (no 1). The valve is open. Turn up the dust bag holder. Pull the

bag up from the dust bag holder. Remove the filter from the

filter holder. Clean the filter with warm water, let the filter dry

completely before replacing it. The filter is not dishwasher

safe.

Cleaning of the exhaust filter

Disconnect the hose from the hose connection (no 2). Open the unit by pressing the handle for

opening dust bag compartment (no 1). The valve is open. Turn up the dust bag holder. Pull the

bag up from the dust bag holder and remove the filter house. Clean the filterhouse with warm

water, let the filter dry completely before replacing it. The filter is not dishwasher safe.

The vacuum cleaner and the other parts you can use a damp cloth to decline.

Never immerse the device in water or other liquid.

Never use the vacuum with a wet filter! This may cause an electric shock and

the unit may malfunction.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Tristar SZ 1911 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Tristar SZ 1911 Manual

Product: