77083
10
Zoom out
Zoom in
Previous page
1/20
Next page
• Keep the buttons pressed down and then pull out the hose.
• Please attach the telescopic suction tube to the grip end (see section
" Suction Tube").
• Then assemble the floor nozzle and/or the accessories.
* Using the Appliance
Unwind the length of cable (2) you require.
Insert the mains plug into a correctly installed 230 V, 50 Hz power socket. Turn
on the device with the on/off switch (1) by pushing the regulator downwards.
Adjust the suction power by turning the suction power regulator (6).
Vacuum at a steady speed. There is no need to exert pressure.
Attention: pay attention to the range that can be covered with the cable length.
* Vacuum power regulator
Low vacuum power: For curtains and delicate fabrics
Medium vacuum power: For long-pile carpets and textile flooring
High vacuum power: For sturdy rugs and floors
* Telescopic Suction Tube:
o This makes it possible to adapt the height to your individual body size. Unlock the coupling by turning the wide
section of the suction tube to the left.
o Move the suction tube as required. To lock the coupling, turn the wide suction tube to the right.
GB
* Overview the components
1.On/off switch
2.Cable & Plug
3.Filter cover - Outlet filter
4.Carrying handle
5.Cable-winding key
6.Vacuum power regulator
7.Dust bag filling display
8.Handle for opening the dust bag compartment
(front cover)
9.Hose connection
10.Big wheel
"2-in-1" nozzle
(groove and brush nozzle)
* Cable winding device:
Pull out the cable (1) up to the maximum length indicated with the yellow mark.
Never pull the cable out up to the red mark as the cable winding can be damaged.
Said damages are not covered by the warranty.
Winding
Press the cable (5) winding button and guide the cable. Hold the cable to avoid wrapping.
Nozzle Attachment:
Crevice nozzle/
Brush nozzle: For vacuuming upholstery, curtains and in corners and crevices etc.
"2-in-1" nozzle: When this is folded together it can be used as a groove nozzle. If you would like to use the brush nozzle,
pull the brush section in the direction of the arrow until it locks in place.
Floor nozzle: To clean carpets or smooth surfaces.
Smooth floors: Press down the lever with the brush symbol with your foot. The brush is now visible.
Carpets: Press down the opposite lever.
Releasing the nozzles: Pull these off while turning slightly.
* Air Slide:
Open the air slide on the hose handle in order to regulate the airflow or to clear any particles sticking to the nozzle.
* Dust bag replacement display (7):
Hold the hose up into air. If the dust bag change display lights up, the bag is full. Please change it.
* Changing the dust bag:
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tristar SZ 1904 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tristar SZ 1904 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info