483964

Tristar ST-8915 Manual

6
Zoom out
Zoom in
Previous page
1/60
Next page
6
BEFORE THE FIRST USE
• Before the rst use, please remove any sticker or protective cover.
• Place your steam generator on a stable, horizontal heat-resistant
surface.
• For the rst use, use the iron on an old piece of fabric to ensure the
soleplate and water tank are completely clean.
• Never use the steam generator when water tank is empty, rell it
before use it again.
NOTE: It is normal that strange odor comes out from the unit for the rst
use. This will cause after a short while.
NOTE: Some particles may come out of the soleplate when you use the
iron for the rst time. This is normal; the particles are harmless and stop
coming out of the iron after a short while.
NOTE: When you switch on the appliance, the steam generator may
produce a pumping sound. This is normal; the sound tells you that water is
pumped into the steam generator.
NOTE: During the heating process of the soleplate, there will be little
steam coming out from the soleplate automatically, this phenomenon will
continue for about 3 seconds, This is normal.
USE
Dry ironing
1. Put the iron on the steam generator’s base.
2. Connect the plug to wall outlet and press the power button.
3. Turn temperature dial to your desired setting, which is depended on
the fabric of garment. The temperature indicator will illuminate, the
iron starts heating.
4. When the temperature indicator turns o, the selected temperature is
reached, you can start ironing.
Caution: Never touch hot soleplate at any time!
Steam ironing
1. Unlock the water tank with the trigger and pull out the water tank,
open the lling cap and ll it with water. Use of puried water with less
calcium particles will extend the life time of the appliance. The max
capacity of water tank is 1.7L, never exceed the maximum water level.
2. Replace the detachable water tank properly.
3. Put the iron on the steam generator’s base.
4. Connect the plug to the wall outlet, press the power button, the
defaulted low steam rate indicator will ash. Turn temperature dial to
your desired setting, which is depended on the fabric of garment, the
temperature indicator will illuminate.
5. The water in the tank will be heated, after a few minutes, the
temperature indicator will be extinguished, it indicates the soleplate
reached the selected temperature. After a few minutes the selected
steam rate indicator will illuminate constantly, now the appliance can
produce steam.
6. According to your requirement, you can select the desired steam
output, there are three modes: low, medium and high. Make sure that
there is enough water in the tank.
Caution: Never direct the steam at people!
7. After ironing, press the power button for a while and the appliance will
be turned o, all the indicators will be extinguished. Remove the plug
from the wall socket. The soleplate is still hot make sure you’ll never
touch it, place the iron on the thermal insulating cushion to let it cool
down completely.
Instruction manual
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tristar ST-8915 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tristar ST-8915 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info