530996

Tristar ST-8226 Manual

20
Zoom out
Zoom in
Previous page
1/38
Next page
20
Always iron these fabrics at low temperatures. The plate may cool down to the point where no more steam comes out,
but
rather drops of boiling water that can leave marks or stains. In these cases, the Anti-drip system automatically activates
to prevent vaporization, so that you can iron the most delicate fabrics without risk of spoiling or staining them.
AUTOMATIC SHUT OFF (Only ES173_01/ES173_02)
The automatic shut off device trips after the iron has been left for approx. eight minutes in the upright position or unused
for approx. Thirty seconds in the horizontal position. The light comes on to indicate that shut off has tripped. As soon as
you move the iron, the device turns off and the iron starts working again.
G E N E R A L I N S T R U C T I O N S
When using the iron for the first time, you may notice a slight emission of smoke and hear some sounds made by the
expanding plastics. This is quite normal and it stops after a short time. We also recommend passing the iron over an
ordinary
cloth before using it for the first time.
PREPARATIONS
Soft the laundry to be ironed according to the international symbols on the garment label, or if this is missing, according
to the type of fabric.
GARMENT
LABEL
FABRIC
TYPE
THERMOSTAT
REGULATION
synthetic
·
low temperature
silk - wool
··
medium temperature
Cotton - linen
···
high temperature
Fabric not to be ironed
Start ironing the garments requiring a low temperature.
This reduces the waiting times (the iron takes less time to heat up than to cool down) and eliminates the risk of
scorching the fabric.
STEAM IRONING
Filling the reservoir
- Check that the plug is disconnected from the socket.
- Move the steam selector (3) to “0”
[Fig. 1]
.
- Open the lid (2).
- Raise the tip of the iron to help the water enter the opening without overflowing.
- Slowly pour the water into the reservoir using the special measure (15) and taking care not to go over the maximum
level (about 300ml) indicated by “MAX” on the reservoir
[Fig. 2]
.
- Close the lid (2).
Selecting the temperature.
- Put the iron in a vertical position.
- Put the plug in the socket.
- Adjust the thermostat knob (11) according to the international symbol on the garment label
[Fig. 3]
. The plate
temperature
control light (9) indicates that the iron is heating up. Wait until the plate temperature control light goes off before ironing.
Warning:
during ironing, the plate temperature control light (9) comes on at intervals, indicating that the selected
temperature is maintained. If you lower the thermostat temperature after ironing at a high temperature, do not start
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tristar ST-8226 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tristar ST-8226 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info