457527
13
Zoom out
Zoom in
Previous page
1/39
Next page
25
Funzionamento e manutenzione
IT
Rimuovere l’imballaggio. Rimuovere lo strato in plastica della piastra di appoggio (Nº .9).
Controllare che la tensione dell’apparecchio corrisponda alla tensione domestica.
Tensione nominale : CA 220-240 V 50 Hz.
Rabbocco acqua
Prima di rabboccare acqua, estrarre il cavo di alimentazione dalla presa e portare il termostato
(Nº .1) in posizione MIN. Rabboccare acqua nel serbatoio dell’acqua (Nº .8) con acqua fredda
fino al livello MAC. Prestare attenzione a non rabboccare una quantità eccessiva d’acqua.
Non rabboccare altri liquidi!
Il raggio del vapore di scarico è molto intenso; controllare quindi che non sia puntato su
persone, animali domestici o oggetti fragili.
Utilizzo del ferro senza vapore
Portare il tasto vapore (Nº .3) in posizione O.
Portare il tasto del termostato (Nº .1) del ferro nella posizione desiderata da MIN a MAX.
Sull’etichetta degli indumenti è riportata la posizione richiesta per il termostato.
Controllare la tabella per il significato delle indicazioni riportate sul termostato.
Per rimuovere le grinze, premere il tasto spray (Nº .6) per umidificare.
Utilizzo del ferro da stiro con vapore
Portare il tasto vapore (Nº .3) in posizione
Per il vapore max oppure girare il tasto vapore (Nº .3) verso destra per una quantità inferiore di
vapore.
Portare il tasto termostato (Nº .1) del ferro nella posizione desiderato da MIN a MAX.
Sull’etichetta degli indumenti è riportata la posizione corretta del termostato per il capo
specifico. Vedere la tabella per il significato dei simboli del termostato.
Premere il tasto Vapore (Nº .7) per stirare a vapore.
Per rimuovere le pieghe, premere il tasto di spruzzatura (Nº .6) per umidificare. Per un getto
supplementare di vapore, premere nuovamente il tasto Vapore (Nº .7).
ETICHETTA
INDUMENTO
TIPO DI
TESSUTO
REGOLAZIONE
TERMOSTATO
Sintetico
·Bassa
temperatura
Seta - Lana
··Temperatura
media
Cotone - lino
···Temperatura
max
Tessuto non stirabile
26
Per pulire il ferro da stiro
Utilizzare la seguente procedura nel caso in cui l’apparecchio venga utilizzato quotidianamente.
Applicare la procedura ogni 2 settimane.
Riempire il serbatoi dell’acqua (Nº. 8) con acqua fredda.
Inserire la spina nella presa e impostare il termostato (Nº 1) sulla posizione MAX.
Tenere il ferro sul lavello.
portare il tasto vapore (Nº.3) in posizione e premere ripetutamente il tasto vapore
(Nº .7).
I fori del vapore tPeam nella piastra di supporto (Nº .9) vengono puliti.
Portare il termostato (Nº .1) in posizione MIN e portare il tasto Vapore (Nº .7) in
posizione O.
Asciugare il ferro con un panno umido. Notare che la piastra di supporto (Nº . 9) è
calda.
Rimuovere l’acqua prima di mettere via il ferro da stiro.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tristar ST-8142 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tristar ST-8142 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info