484030
6
Zoom out
Zoom in
Previous page
1/88
Next page
6
INSTALLATION AND CONNECTION
Remove all packing material and accessories. Examine the oven for any
damage such as dents or a broken door. Do not install if the oven is
damaged.
Remove any protective lm, found on the microwave oven cabinet surface.
Do not remove the light brown Mica cover that is attached to the oven
cavity to protect the magnetron.
Select a level surface that provide enough open space for the intake
and/or outlet vents.
The rear surface of appliance shall be placed against a wall. A minimum
clearance of 7.5cm is required between the oven and any adjacent
walls. One side must be open. Leave a minimum clearance of 30cm
above the oven. Do not remove the feet from the bottom of the oven.
Blocking the intake and/or outlet openings can damage the oven.
Place the oven as far away from radios and TV as possible. Operation of
microwave oven may cause interference to your radio or TV reception.
Plug your oven into a standard household outlet. Be sure the voltage
and the frequency is the same as the voltage and the frequency on the
rating label.
Do not install the oven over a stove or other heat-producing appliance.
If installed near or over a heat source, the oven could be damaged and
the warranty would be void.
OPERATION INSTRUCTION
This microwave oven uses modern electronic control to adjust cooking
parameters to meet your needs better for cooking.
1. Clock Setting
When the microwave oven is electried,the oven will display "0:00", buzzer
will ring once.
1. Press " CLOCK/PRE-SET ", the hour gure ash;
2. Turn to adjust the hour gures, the input time should be within 0--23.
3. Press " CLOCK/PRE-SET ", the minute gures will ash.
4. Turn to adjust the minutegures, the input time should be within 0--59.
5. Press " CLOCK/PRE-SET" to nish clock setting. ":" will ash.
Note:
If the clock is not set, it would not function when powered.
During the process of clock setting, if no oppreation in 1 minute, the
oven will go back to the previous status automatically.
2. Microwave Cooking
1. Press the "Micro./Grill/Combi. " key once, and "P100" display.
2. Press " Micro./Grill/Combi." for times or turn to select the microwave
power "P100", "P80", "P50", "P30", "P10" will display in order.
3. Press "START/+30SEC./CONFIRM " to conrm.
4. Turn to adjust the cooking time. (The time setting should be 0:05- 95:00.)
5. Press " START/+30SEC./CONFIRM " to start cooking.
NOTE: the step quantities for the adjustment time of the coding switch are
as follow
0---1 min : 5 seconds
1---5 min : 10 seconds
5---10 min : 30 seconds
10---30 min : 1 minute
30---95 min : 5 minutes
Microwave Power Chart
Microwave Power 100% 80% 50% 30% 10%
Display P100 P80 P50 P30 P10
Instruction manual
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tristar MW-2705 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tristar MW-2705 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 1,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info