471939

Tristar KZ-1223 Manual

4
Zoom out
Zoom in
Previous page
1/16
Next page
7
Operation and maintenance
UK
Remove all packaging of the device.
Check if the voltage of the appliance corresponds to the main voltage of your home.
Rated voltage : AC220-240V 50Hz.
Place the device on a flat stable surface and ensure a minimum of 10 cm. free space around
the device. This device is not suitable for installation in a cabinet or for outside use.
Before first use
Take the removable filter out of the funnel (No. 2) rinse the filter and the coffeepot (No. 4) with
hot water. Half-fill the water tank (No. 3) with water and place the filter and the coffeepot back
on the device. Turn the on/off switch (No. 6) to ON. The device is rinsed with hot water.
Turn the machine off and empty the coffeepot. Attention! The water is hot.
Your coffee machine is ready for use.
Use
Fill the reservoir with the desired quantity of clean drinking water. Place a paper coffee filter in
the removable filter or just use the removable filter only, depending on your needs.
Fill the filter with the desired amount of ground coffee.
Place the coffeepot (No. 4) underneath the filter and switch the device to ON.
Make sure the coffeepot is placed correctly on the hotplate.
When you remove the coffeepot from this appliance, a non-drip valve will automatically
operate and prevents drops of coffee dripping onto the hotplate (No. 5). Replacement of the
coffeepot automatically opens the non-drip valve and allows any remaining coffee to filter
through into the coffeepot. Wait until the brewing process is finished and the filter is empty.
Switch off the device when it is ready. If you want to keep the coffee hot, place the coffeepot
back at the hotplate and switch the device to ON. Your coffee will remain hot for several hours.
Cleaning the device
Remove the detachable filter out and empty it into the bin. Rinse the removable filter and the
coffeepot after use with hot water. Remove the other filter regularly and rinse it with warm
water. These parts are not suitable for the dishwasher.
Decalcifying the coffee machine
prolongs it’s life span. For decalcification only use products especially made for decalcification
of coffee machines. Always rinse the device with water after decalcification.
The outside surface of the coffee maker should be cleaned with a damp cloth.
Your coffee will remain hot at the
hotplate (No. 5). Be sure the device
is switched to ON.
8
IMPORTANT SAFEGUARDS
• Read all instructions before use.
• Do not touch hot surfaces. Use handles or knobs.
• To protect against electric shock, do not immerse cord, plug or appliance in water or
any other liquid.
• Unplug from outlet when not in use and before cleaning. Allow the device to cool
before putting on or taking off parts. Do not operate any appliance with a damaged
cord or plug or after the appliance malfunctions, or has been damaged in any
manner.
• The use of accessory attachments not recommended by the appliance manufacturer
may cause injuries and invalidate any warranty you may have.
• Do not use outdoors, or on or near direct heat sources
• Do not let cord hang over edge of table or counter, or touch hot surfaces or come
into contact with the hot parts or allow the product to be situated underneath or close
to curtains, window coverings etc.
• This appliance is for household use only and only for the purpose it is made for.
• The appliance must be placed on a stable, level surface.
• This appliance is an attended appliance, and as such should never be left ON or
whilst hot without adult supervision.
• This appliance is not intended for use by persons (including children) with reduced
physical sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• This device is not intended for use with an external timer or a remote control system.
• Note: To avoid danger by the accidental resetting thermal protection, the device may
not be powered through an external switching device, such as a timer, or connected
to a circuit and is turned regularly by the subject.
• This device is not intended for use with an external timer or a remote control system.
• Note: To avoid danger by the accidental resetting thermal protection, the device may
not be powered through an external switching device, such as a timer, or connected
to a circuit and is turned regularly by the subject.
• A damaged cord or plug must be replaced by an authorized technician to avoid a
hazard. Do not repair the device yourself.
• Using an extension cord or something similar is not allowed.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tristar KZ-1223 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tristar KZ-1223 in the language / languages: English, German, Dutch, French, Italian, Polish, Swedish as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info