Manual Tristar KB-7146 (page 6 of 80) (English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish)

530932

Zoom out

Zoom in

1/80

• When changing the gas cylinder and/or disconnecting the hose, it is

mandatory to close the valve of the gas cylinder.

• Replace the hose if it is damaged or if it becomes porous and in any

case before the expiry date printed on the side.

GAS VALVE ASSEMBLY

• This assembly consists of an adjusting device with an incorporated

safety pilot, a burner with an electric igniter.

• The adjusting device can be set to 3 different positions:

Max Maximum cooling

MIN Minimum cooling

0 off Igniting position / burner gas supply closed

• The safety pilot automatically maintains the gas supply to the burner, as long

as it remains lit. It automatically shuts off the supply if the flame goes out.

IGNITION OF THE GAS BURNER

• Open the valve of the gas cylinder. Press the adjusting knob and hold it

in this position, then turn the knob anti-clockwise to Max.

• If the appliance has not been ignited for a long period, or if the gas

cylinder has been changed, there may be some air in the duct, so it

may fail to be ignited. It is necessary to check that the pilot is lit by

looking through the orifice at the top of the appliance. If the appliance

fails to be ignited, try it again after approximate 10 seconds.

• When the outside temperature is low, set the adjusting device to MIN

after a sufficient long cool-down period in MAX position.

To disconnect an appliance running on gas far from any source of ignition

• Shut off the gas cylinder or the pressure regulator. Turn the knob to the

OFF position.

Storing food

• Liquids to be stored in cool box shall always be placed in a closed vessel.

• The air circulation inside the appliance must not be obstructed.

Never place hot food or drink in the appliance. Never keep ammable

liquids and/or gases inside the cool box. Danger of explosion.

DEFROSTING  MEASURES TO BE TAKEN IF THE

APPLIANCE IS TO BE LEFT UNUSED FOR A LONG

PERIOD

The cool box must be defrosted regularly, in order to ensure that it

operates correctly. To defrost the cool box, disconnect it and remove all

food outside. If necessary, use a cloth soaked with hot water. After de-

icing, mop up the water with a dry clean cloth and clean the inside. If the

appliance is to remain unused for a extensive period, disconnect it and

remove all food outside. After de-icing, clean and dry the inside of the

appliance. In order to prevent unpleasant odor, leave the cover of the cool

box slightly open.

Measures to be taken after unused for a long period

If, after an extensive lay-up period, the cool box does not produce any

cooling, disconnect the appliance and turn it upside down for a few minutes

then turn it the right way up. After turn it over several times, reconnect it.

MAINTENANCE

• Clean the appliance regularly with warm water, containing a detergent

if necessary.

• Never use an abrasive product. Dry the cleaned surfaces with a soft cloth.

• Use only clear water to clean the seal of the cover, and then coat the

seal with talcum powder.

Instruction manual

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Tristar KB-7146 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 0,68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Tristar KB-7146 Manual

Product: