Manual Tristar BQ-2817 (page 5 of 68) (English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish)

484043

Zoom out

Zoom in

1/68

III

Barbecue-grill

Take the trolley frame and

accessoires out of the box. Please

make sure that the trolley frame

is placed on a dry, at and stable

surface. Let the wheel axle (a) pass

through two holes which are at

the end side of the tube.

After standing up the trolley frame,

you MUST set the safety locking unit

(f) immediately. This safety locking

unit is with self-locking feature. Press

the spring (e) and hook the bent

hook(f) on the extension part (e).

Then stop pressing the spring and

it will retract to lock the safety hook

unit automatically.

Attention: Make sure the safety

hook unit is LOCKED during

cooking or moving. DO NOT try to

turn or pull the safety hook while

using this appliance.

Attach the wheels (b) at

the two sides of the axle (a)

respectively.

Firstly, remove the screw from

the trolley tube. Then install the

stand tube (G1) onto the trolley

tube. and install the stand

tube (G2) onto the trolley tube.

There is a positioning hole (IV)

on the stand tube (G2), it will

attach G1 and G2 to each other

by screws. Tight the stand tube

(G1 and G2) and trolley with

screws and nuts.

There are two mounting holes

on each end side of the axis (a),

insert the “R” pin(c) through the

hole. This will lock the wheels.

Place the bowl-shaped base of

the appliance (h) into the stand

tube (g).

Fix the bottom of the base

into the positioning hole (IV).

When removing the base from

the stand tube (g), please step

slightly on the supporting tube,

hold the handles of the base

and take it o.

Press the wheel covers (d) to

the wheels (b) according to the

three location tips.

Install the hood. Hold the

hood handle (p) and insert the

clips(O) into the installation

holes (Q) of the base. When

removing the hood, please

open the hood and tilt to 45°

between hood and grill plate,

and detach the clips(o) from

installation holes (Q).

Put the trolley in the

upward position: First,

step on the middle of the

supporting tube (I) with your

right foot, lift up the side

table (II) with your right hand

while lifting the tube for the

wheel (III) upward with your

left hand. Then connect the

tube (III) with the tube which

is located under the side

table. The trolley frame is

standing up now.

Fold up the trolley: First,

step on the middle of

supporting tube (I) with your

right foot, hold up the side

table (II) with your right hand

whilst your left hand holds

the short edge of support

tube (III) and place it down

slowly.

Attention: when folding

up the trolley , Do not hold

the two sides of tube (III) to

avoid that your hand got

pinched.

1 2

6 7 8

3 4

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Tristar BQ-2817 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 17,39 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Tristar BQ-2817 Manual

Product: