Manual Tristar BQ-2816 (page 5 of 60) (English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish)

530684

Zoom out

Zoom in

1/60

Barbecue-grill

Place the stand feet (10A) into the

stand base (10B) properly. You will

hear a “click” sound when the foot

is xed well.

Place the washer (16) onto the

stand base and install the screws

(17) into the washer to x the

stand feet and stand base rmly.

Turn half of the threaded rod (a) in

the lower tube (9), put the decorative

ring (8) on the lower tube (9) and

assemble both tubes together;

ensure that they are xed well.

Connect the grill stand base (10)

and the lower tube (9) together to

form the complete grill stand. The

grill can be used with or without

this stand.

Install the screw (b) into upper

tube (7) and put the condiment

tray on the upper tube. Make sure

that the tray is xed well.

Place the bowl-shaped base of the

appliance (5) onto the grill stand.

Make sure that the grill stand is

placed on a dry at, stable surface.

Put the grease tray (4) into the

appropriate slot in the base of the

appliance. The grease tray can be

lled with some water to make it

easier to clean.

Place the hood (1) into the base.

Position the hood as a wind

breaker when you use the grill in

the open air.

Push the detachable thermostat

(13) as far as it will go into the

grill’s appliance socket.

Place the grill plate (3) on the base

of the appliance (5). First of all insert

the appliance socket (15) into the

appropriate opening in the base (12),

then place the grill plate horizontally

on the appliance base.

1 2 3 4 5

6 7 8 9 10

Note: this section is only for the

BQ-2815

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Tristar BQ-2816 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 7,88 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Tristar BQ-2816 Manual

Product: