530959

Tristar BO-2102 Manual

4
Zoom out
Zoom in
Previous page
1/29
Next page
7
Operation and maintenance
UK
Remove all packaging of the device.
Check if the voltage of the appliance corresponds to the main voltage of your home.
Rated voltage : AC220-240V 50Hz.
Place the device on a flat stable surface and ensure a minimum of 10 cm. free space around
the device. This device is not suitable for installation in a cabinet or for outside use.
Never use the appliance near a sink filled with water or something.
If the device has fallen into the water never try to hold it, but pull the plug from the socket.
Never use the device for opening cans of flammable liquids.
Before first use
Attach the lever (No. 1) on the unit standing by sliding the shaft in the hole above the control
wheel (No. 2) of the device. Attention! The blade of the lever is very sharp.
Use
Turn the lever (No. 1) up and put the can under the retainer axis and against the control wheel
(No. 2). Push the lever down and pierce the can, the machine will start working now. Keep
pushing on the lever, the device will automatically stop when the lid is fully opened.
Grab the can and lift the lever to remove the tin.
Please ensure that you do not cut yourself when you remove the lid, the lid is very sharp.
The size of the can opener is also suitable for opening high cans.
Place the can opener on the edge of the work surface and hold it firmly, to avoid tilting the
device.
Use of the grinder
Make sure that the blade is clean and not oily to prevent to grinding wheel to be dirty.
Do not attempt to sharpen serrated knives! Uneven polishing can be avoided by not pushing
too hard on the knife during sharpening. Hold the lever (No. 1) down to switch on the device.
Place the blade (near the handle) into the opening of the knife sharpener (No. 4) until it
touches the grinding wheel. Pull the knife slowly toward you through the opening.
Repeat 4-5 times until the knife sharpening.
Cleaning
Unplug the appliance from the socket.
Remove the lever (no. 1) of the machine and clean it with warm water. Dry thoroughly before
replacing. Attention! The blade of the lever is very sharp.
Never immerse the appliance in water or other liquid.
Clean the outside of the appliance with a damp cloth and dry it with a soft, clean cloth. Never
use abrasives.
8
IMPORTANT SAFEGUARDS
• Read all instructions before use.
• Do not touch hot surfaces. Use handles or knobs.
• To protect against electric shock, do not immerse cord, plug or appliance in water or
any other liquid.
• Unplug from outlet when not in use and before cleaning. Allow the device to cool
before putting on or taking off parts. Do not operate any appliance with a damaged
cord or plug or after the appliance malfunctions, or has been damaged in any
manner.
• The use of accessory attachments not recommended by the appliance manufacturer
may cause injuries and invalidate any warranty you may have.
• Do not use outdoors, or on or near direct heat sources
• Do not let cord hang over edge of table or counter, or touch hot surfaces or come
into contact with the hot parts or allow the product to be situated underneath or close
to curtains, window coverings etc.
• This appliance is for household use only and only for the purpose it is made for.
• The appliance must be placed on a stable, level surface.
• This appliance is an attended appliance, and as such should never be left ON or
whilst hot without adult supervision.
• This appliance is not intended for use by persons (including children) with reduced
physical sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Note: To avoid danger by the accidental resetting thermal protection, the device may
not be powered through an external switching device, such as a timer, or connected
to a circuit and is turned regularly by the subject.
• This device is not intended for use with an external timer or a remote control system.
• Note: To avoid danger by the accidental resetting thermal protection, the device may
not be powered through an external switching device, such as a timer, or connected
to a circuit and is turned regularly by the subject.
• A damaged cord or plug must be replaced by an authorized technician to avoid a
hazard. Do not repair the device yourself.
• Using an extension cord or something similar is not allowed.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tristar BO-2102 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tristar BO-2102 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Turkish, Spanish, Norwegian as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info