657372

Tristar AC-5560 Manual

7
Zoom out
Zoom in
Previous page
1/84
Next page
7
EN
• Twist both ends of the exhaust hose into the square xing clip and the
at xing clip.
• Insert the square xing clip into openings at back of the air conditioner.
• Put the other end of the exhaust hose to the near windowsill.
WINDOW SLIDER KIT INSTALLATION
The installation manner of window slider kit is mostly in “horizontal” and
“vertical”, No much dierence in actual process.
Internal Tank Water Full Alarm Function
The inner water tank in the air-conditioner has one water level safety
switches, it controls water level. When water level reaches an anticipated
height, the water full indicator lamp lights up. (If water pump is damaged,
when the water is full, please remove the rubber blockage at the bottom
of unit, and all water will drain outside.)
CLEANING MAINTENANCE
• Before cleaning, be sure to disconnect the unit from any electric supply
outlet.
• First clean the surface with a neutral detergent and wet cloth, and then
wipe it with a dry cloth.
• Do not use gasoline or other chemicals to clean the unit.
• Do not wash the unit directly.
• If the conditioner is damaged, please contact the dealer or repair shop.
Air Filter
• If the air lter becomes clogged with dust/dirt, the air lter should be
cleaned once every two weeks.
• Open the air inlet grille and take o air lter.
• Clean the air lter with neural detergent in lukewarm (40°C) and dry it
up in the shade.
• Putting the air lter into the inlet grille, replace the components as
they were.
TROUBLE SHOOTING
Troubles Possible Causes Suggested Remedies
The unit
does not
start when
pressing on/
o button
• Water full indicator lamp blinks, and
water tank is full.
• Room temperature is higher than
the setting temperature. (Electric
heating mode)
• Room temperature is lower than
the setting temperature. (Cooling
mode)
• Dump the water out
of the water tank.
• Reset the temperature
• Reset the temperature
The unit
doesn’t cool
enough
• The doors or windows are not closed.
• There are heat sources inside the
room.
• Exhaust air hose is not connected
or blocked.
• Temperature setting is too high.
• Air inlet is blocked.
• Make sure all the
windows and doors
are closed.
• Remove the heat
sources if possible
• Connect or clean the
exhaust air hose.
• Reset the temperature
• Clean the air inlet.
Auto Power-
O in heat-
ing mode
Heating protection, when the temper-
ature at the air outlet exceeds 70
o
C,
the unit will power o automatically.
Restart the unit at
enough lower room
temperature.
Noisy • The ground is not level or not at
enough
• The sound comes from the owing
of the refrigerant inside the air
conditioner
• Place the unit on a
at, level ground if
possible
• It is normal.
Air conditioner
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tristar AC-5560 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tristar AC-5560 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Swedish, Spanish as an attachment in your email.

The manual is 1,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info