530630
6
Zoom out
Zoom in
Previous page
1/70
Next page
5
USE OF CONTROL PANEL
POWER SOURCE
The AC socket must be firm and reliable.
Don’t connect the mobile air conditioner to a multiple socket outlet which is also being used for other
electrical appliance.
Insert the AC power plug securely into the AC socket before using the unit, when it beeps after two
seconds, press” ON/OFF “button, the unit begins to run.
COOLING OPERATION
1.Repeatedly press “MODE” button to choose the cooling mode, LCD window will show “COOL”.
During the cooling operation, always place the duct through an open window to exhaust warm air from
the room.
2. Repeatedly press TEMP+” or “TEMP –“ button to set a proper room TEMP. at 17-31 or
(63-88).
3. Press “FAN SPEED” button to choose a proper fan speed, high, middle, low speed.
4. Press “SWING” button to adjust air delivery direction, The LCD window will show “
NOTE:
In order to improve the cooling efficiency, be careful that:
a) If your room is directly exposed to the sun, pull down the curtains please.
b) Do not place the machine near other heat source.
DEHUMIDIFYING OPERATION
1. Keep the windows and the doors closed to help dehumidify the room effectively.
2.Repeatedly press MODE” button to choose the dehumidifying mode, LCD window will show DRY”, the fan
speed cannot be adjusted.
3. When used only as a dehumidifier, do not use the air exhaust duct.
HEATING OPERATION
1. Repeatedly press the “MODE” button, select the heat mode, The LCD window shows “HEAT”.
2. Press “TEMP+” or “TEMP-“ button to set a proper room temperature at 17-31 or (63-88).
3. Press “FAN SPEED” button to choose the fan speed: high-middle-low.
4. Press “SWING” button to adjust the air delivery direction, The LCD window will show ”.
TIME SET FUNCTION
To set time to start the machine with the unit off (but with power on), press “ TIMER” button, the LCD window will
show ” “ press the TIME button, set the time to start as you like. The setting range is 1-12 hours.
To set time to stop the machine when the unit is running, press “TIMER” button, the LCD window will show
“, press the TIME button set the time to stop the machine as you like. The setting rang is 1-12 hours.
If you have set switch on/off after 12 hours, press this key again, then you could cancel the timing.
AUTO SWING FUNCTION
1. For auto swing function, press SWING” button, LCD window will show “, and then begin to swing
automatically.
2. Press once again “ SWING” button, the symbol “ in the LCD window will disappear, the swing stops.
Caution:
Pressing ” ” and “ ” buttons together for more than two seconds will lock the keys, on LCD window will show “
“ . Pressing the two buttons again can unlock the keys, the symbol “ “ will disappear.
CAUTION
WARNING
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tristar AC-5492 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tristar AC-5492 in the language / languages: English, Dutch as an attachment in your email.

The manual is 2 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info