EN-6
2.2 Automatic Search
a) Use the / button to select automatic
search and press the OK button, Into the
automatic search interface, Wait while the
receiver searches for the channels, this may
take a few minutes.( Figure 2.5 show)
b) In automatic search period, the progress
instructed that the strip will have the search
progress indication, in search period, if will
press the OK button operation to pause,
press the / button to select Save button
and exit.
c) If search operation is successfully completed,
and the channel does not exist, press the
CANCEL button to select Exit and try to reset
the search operation again if necessary.
d) The auto search will complete the program which the automatic demonstration
will search in the left side program tabulation, please choose save and exit
menu.
2.3 Manual Search
a) Press the OK button and use / button to
select Manual Search, enter manual search
interface.
b) You can use / button to select channel
and frequency ,press the OK button to enter,
you can using / button to change channel
and frequency.
c) Use the / button to select search button,
press the OK button to search.
d) When completing Channel Search, press the
OK button can automatic to save the changes
and display program.
Remark
• Please wait for nishing the Channel Search. If you want to stop the Channel
Search, press the OK button. If the Channel Search is stopped or nished,
the result of Channel Search is automatic saved and display the channels
program.
• If search operation is successfully completed, and the channel does not exist,
press the OK button and try to reset the search operation again if necessary.
When completing Channel Search, the Channels automatic save to changes.
You can easily set-up using simple organization and options, and watch the
broadcasting after completing the set-up procedure.
• Press the CANCEL button to save the previous input information and exit
Figure 2.5
Figure 2.6
