757656
19
Zoom out
Zoom in
Previous page
1/20
Next page
Troubleshooting
If your Trionic Veloped does not work satisfactory, you can
check it by following the troubleshooting guide below. If the
guide does not help you solve the problem, please contact your
retailer, service provider, distributor or Trionic Sverige AB.
Environmentally Friendly
e Trionic Veloped is manufactured in the way to have as little
negative impact on the environment as possible during its lifecy-
cle. When the product has served its purpose it can be scrapped
and the parts can be recycled.
e product’s aluminium components are separated from
the remaining parts when sorted for recycling. e parts are
sorted into metal, plastic and mixed materials.
e greater part of the product is made of aluminium, steel
and plastic.
Examples of components made of mixed materials are the
brake levers, wheels and gripbar.
If you are uncertain of how to handle the recyclable mate-
rial, please contact your local authorities, as dierent muni-
cipalities/recycling companies follow dierent recycling
methods.
Trionic Sverige AB is a member of REPA, PRO Europe (Die
Grüne punkt) and fully implements the European Directive on
Packaging and Packaging Waste dated December 20, 1994.
Problem: The seat is sagging/too low.
Possible cause: The rear velcro band under
the seat base needs to be tightened, or the
Veloped is not correctly unfolded.
Action: Remove the seat cover and tighten
the rear velcro band of the seat base, with
the Veloped fully unfolded. Do not tighten
the Velcro band too much since it may turn
the sliding of the seat back and forth more
difcult.
Problem: Difcult steering.
Possible cause: The front wheel is adjusted
for irregular terrain/upper position.
Action: Change the setting of the front
wheel suspension to the easy turning mode/
lower position, as described in the chapter
«Change the Front Wheel Setting».
Problem: Poor brake function.
Possible cause: The brake hub or brake band
is worn out, or the cable is not tight enough.
Action: Adjust the brake cable tension as
described in the chapter «Brake
Adjustment».
Problem: The rear or front wheels are not
secured.
Possible cause: The wheel has not been cor-
rectly attached.
Action: Check that the push button of the
axle locks correctly. Please contact your
service provider if the wheel does not lock
correctly in position.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trionic Veloped at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trionic Veloped in the language / languages: English as an attachment in your email.

The manual is 4,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trionic Veloped

Trionic Veloped User Manual - German - 20 pages

Trionic Veloped User Manual - Dutch - 20 pages

Trionic Veloped User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info