485385
29
Zoom out
Zoom in
Previous page
1/36
Next page
4.4 System Setting
4.4.3 Lock Control
Press the UP/DOWN button on the Set list to select Lock Control
and then press the OK button.
Press the UP/DOWN buttons to select either Menu Lock, Parental
Lock, Receiver Lock or Change PIN Code and then press the RIGHT
button to move to the right pop-up menu.
Ƈ Menu Lock
If the Menu Lock is already set, the PIN code is needed to set the Edit
Channel List and System Setting.
If you want to set the Menu Lock, press the UP/DOWN buttons to select
Locked and then press the OK button.
Ƈ Parental Lock
When you change “Parental Lock” to “On” or “Off”, service channel can
get or not from that set values. If you select “On”, you may need PIN
code every time you select the lock channel program as you set in the
channel control.
If you select “Off”, you can see all channels without PIN code.
Ƈ Receiver Lock
If you select “On”, you will have to enter the PIN code every time you
start the receiver from standby.
Ƈ Change PIN Code
From here you can change the PIN code from the standard 0000.
DO NOT FORGET IT! Without it, you are not able to access to any of
the functions where the code is required.
You can change password for Parental Lock and Receiver Lock
simultaneously.
Input the current PIN code using the
NUMERIC buttons on the
remote control.
In the highlighted new PIN code, input a new PIN code.
To verify the new PIN code, re-enter a new PIN code in the
highlighted confirm PIN code. If the PIN code is correct,
the message “Success” will be displayed on the display window.
Note
If you forget the PIN code, press the RGYB(Color) button in sequence.
(i.e. Red ĺ Green ĺ Yellow ĺ Blue button) The PIN code will be changed
to 0000.
Ƈ Auto Power
If the Auto Power is set to On and power is off, the Set turns on
automatically and turns into the channel mode which you were
watching before power breakdown.
If the Auto Power is set to Off and power is off, the Set turns into the
standby mode.
29
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Triax SR 322 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Triax SR 322 in the language / languages: English as an attachment in your email.

The manual is 1,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info