485389
32
Zoom out
Zoom in
Previous page
1/47
Next page
GB
4. S-Video Output
Analog video output for connecting Home Theatre systems through matching input jacks.
5. Analog Video Output
Analog video output for connecting Home Theater systems or monitors. The available video output
signal format is "CVBS"
6. Digital Audio Output (Coaxial)
Dolby Digital and Linear PCM Stereo output for digital input of a HiFi or A/V system with integrated
digital decoder.
7. Analog Audio Output (Stereo)
Audio Stereo L/ R signal for connecting your TV, HiFi or Home Theatre system.
8. SCART Connector (TV)
For connection of all audio and video signals of this digital receiver to the TV set.The video signal
is output as RGB or "CVBS" (F-BAS) respectively.
9. SCART Connector (VCR)
For connection of all audio and video signals of this digital receiver to a video cassette recorder
(VCR).The video signal is output as "CVBS" (F-BAS) respectively
10. VHF / UHF Terrestrial Antenna Input 1 (RF 1)
This signal input is allocated to Tuner 1. Connect your DVB-T aerial antenna to this terminal (RF1
IN). "Active" antennas system with amplifiers built-in will be powered with the required 5V via this
terminal; (to be selected in the "General Settings" menu, item "Antenna Booster Power").
11. Antenna Loop-Through Output 1 (RF 1)
If you have another analogue or digital receiver or RF 2 Input and you wish to use the same
antenna, then you can connect it to this "antenna loop-through" output jack (RF OUT)
12. VHF / UHF Terrestrial Antenna Input 2 (RF 2)
This signal input is allocated to Tuner 2. Under normal
circumstances the same aerial antenna is used for both tuners
1 and 2. Thus we recommend connecting Terminal 2 (RF 2 IN)
to the Loop-through output of Tuner 1 (RF 1 OUT) with the
supplied patch cable (see figure).
Note: If, however, you use separate aerial antennas for the tuners, please be aware of the fact that
the Terminal "RF 2 IN" does not provide the 5V power feed required by active aerial antennas
13. Antenna Loop-Through Output 2 (RF 2)
If the Loop-through output 1 is occupied (e.g. the patch cable connects it to Tuner 2), you can
connect another digital or analogue TV receiver via the Loop-through output 2 (RF2 OUT) to the
same aerial antenna. The "Loop-through" signal is then input to this device.
14. Mechanical Power Switch
Please note that the STB will be isolated completely from the 230V mains supply only after setting
this mechanical power switch to OFF.If the device is not used for a long period of time, we
recommend switching it off completely with this switch and disconnecting it from the power supply.
CAUTION:
Do not mix up RF IN and RF OUT jacks when connecting your antenna system.
DVB T1 TWIN
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Triax DVB T1 Twin at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Triax DVB T1 Twin in the language / languages: English, German as an attachment in your email.

The manual is 9,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info