424674
39
Zoom out
Zoom in
Previous page
1/47
Next page
These settings may need modifications if you use a specific LNB or a satellite antenna system that has
been installed with DiSEqC equipment (such as selector switches and / or motor antenna systems).
Please follow the instructions that come with this equipment or ask your dealer.
9.2 DiSEqC Setting (General Setting)
There is a DiSEqC option in the Main Menu. Please be sure to have selected the "DiSEqC 1.0" option as
long as you don't employ equipment according to "DiSEqC 1.2" or "USALS" standards. Changes can be
made using the buttons.
9.3 DiSEqC 1.0
In principle, there are two kinds of external DiSEqC switches on the market. One is for connection of two
LNBs, the other one is for connection of up to four LNBs. In the "Auto Search" sub menu you can select
the DiSEqC LNB input 1 / 2 / 3 or 4 for each LNB connected to the corresponding switch port of the
DiSEqC switch.
For details please follow the instructions that come with you DiSEqC equipment.
Select DiSEqC 1.2
or
select USALS
according to your needs. Then please proceed to the "Antenna
Positioner" sub menu in the "Main Menu".
To position the antenna using the DiSEqC 1.2 method,
you will need to set the movement limits first. The reason for this is
to reduce the danger of the antenna coming into contact with any
obstructing object during the antenna positioning operation.
When the movement limits are set, the antenna only moves within the limits specified.
9.4 Antenna Positioner / DiSEqC 1.2
The "Antenna Positioner" function of this receiver enables you to use a motorized antenna to view
multiple satellites. Most motor antennas can be controlled by DiSEqC 1.2 technology, some of them
also can be used for USALS. This convenient function locates the desired satellite if the latitude /
longitude of the receiving place and satellite longitude are known.
For setting up such a system it is needed to set the DiSEqC menu item in the
"General Settings" menu accordingly:
GB
9. Advanced Operation
In this section some settings and operations are described that require certain expertise and basic
knowledge about satellite reception and digital TV for being carried out without fail. For most TV
viewers there should be no need to use, modify or adjust the items as described below.
In case of doubt please ask your dealer for support.
9.1 LNB Settings
This receiver has been factory-preset to the requirements of the most commonly used LNB types.
You can check or modify the actual settings in the menu "Channel Manager", sub menu "Auto
Search" or "Manual Search". In case you wish to edit the parameters using the "Auto Search" sub
menu, you need to press the GREEN button first. These are the preset items:
LNB Local Freq. Universal
DiSEqC OFF
22 kHz AUTO
0 / 12 V Control 0 V
DVB S1
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Triax dvb s 1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Triax dvb s 1 in the language / languages: English, German as an attachment in your email.

The manual is 12,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info