541091
18
Zoom out
Zoom in
Previous page
1/90
Next page
Error! Reference source not found. User Guide
10
Error! Reference source not found. is allocated a new IP
Address during configuration.
LAN Installation
Installing your new Error! Reference source not found. in
your existing Ethernet LAN is quick and easy. Simply follow
the instructions below:
1. Choose an Installation Site
Select a place on the network to install the Error! Refer-
ence source not found.. Remember that you need phone
jacks and power outlets near your chosen location.
2. Connect Network Cable
The Error! Reference source not found. supports two
types of network cables: Thin Ethernet (10Base2, BNC
connector) and Twisted Pair Ethernet (10BaseT, RJ-45
connector). During power up, the unit automatically de-
tects the type of network cable and adjusts to that
environment.
10Base2 Cabling:
If your network uses 10Base2 cable, insert a BNC “T”
connector into the Error! Reference source not found.’s
BNC port. Connect the cable to one end of the “T”
connector and connect the outgoing cable to the other end.
If the Error! Reference source not found. is at the end of
the network, then cap off the other end of “T” connector
with a 50-ohm terminator. Also, keep in mind that the
maximum effective length between the ends of a 10Base2
network is 185 meters.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trendnet TW200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trendnet TW200 in the language / languages: English as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info