541093
19
Zoom out
Zoom in
Previous page
1/90
Next page
Installation
11
10BaseT Cabling:
If your network uses 10BaseT cable, insert one end into
the Error! Reference source not found.’s RJ-45 jack and
the other end into the 10BaseT hub. Keep in mind that the
maximum effective length from the hub to the device is
100 meters.
Warning: Do not attempt to connect more than
one type of cable at the same time or
change the network cable while the
Error! Reference source not found. is
powered On.
3. Connect Modem & Phone Line
Connect the modem, using a standard serial cable, to the
Error! Reference source not found.’s serial port. Next,
connect a telephone line from an RJ-11 style phone jack to
the modem.
4. Connect Power Adapter
Connect the modem’s power adapter to the modem and the
Error! Reference source not found.’s power adapter to
the Error! Reference source not found.. Power both de-
vices On.
Only use the power adapter provided
with your unit. Using a different one
may cause hardware damage.
5. Check the LEDs
When the Error! Reference source not found. is pow-
ered On, both LEDs should light, then the Error LED
should go off. If the Error LED stays on, there is a hard-
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trendnet TW 100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trendnet TW 100 in the language / languages: English as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info