541200

Trendnet TV-IP300W Manual

17
Zoom out
Zoom in
Previous page
1/52
Next page
32
settings are Infrastructure mode and Ad-Hoc mode. The
default setting is Infrastructure.
- Channel: The pull-down menu provides the wireless channel
for communication. A "channel" is a range of frequencies to
be used in communication between the camera and access
point (Infrastructure mode) or the camera and computer (Ad-
hoc mode). Select the appropriate channel from the list
provided depending on the regulatory region where the unit is
sold. The default setting is channel 6.
- TX rate: This option is used to set the current transmitting
rate. The speed should be set to Auto rate to optimize
performance and range, which will adjust the transfer speed
for best performance and longest range automatically.
- Preamble: You can set the length of preamble by choosing
Long preamble or Short preamble from the pull-down menu.
- Data Encryption: Wireless network communications can be
intercepted easily. Enable this option will help you protect
your wireless network. When enabled, choose the proper
settings in the following options, including Auth mode, Key
length, and Key format.
To enable WEP Encryption, you should decide the encryption
format first by selecting the ASCII or HEX in Key format
option, and then input the WEP key.
ASCII input format:
ASCII format causes each character you type to be
interpreted as an eight-bit value. All unaccented upper- and
lower-case Western European characters that can be input
through your keyboard's typing zone are valid. To setup a
64-bit WEP key, input 5 ASCII characters. For example,
‘12345’. To setup a 128-bit WEP key, input 13 ASCII
characters. For example, ‘1234567890123’. These
character counts result in bit counts of 40 and 104
33
respectively; the camera will automatically pad your input to
a bit count of 64 or 128.
HEX input format:
Hex format causes each pair of characters you type to be
interpreted as an eight-bit value in hexadecimal (base 16)
notation. Only the digits 0 through 9 and the letters A
through F (in upper or lower case) are valid. To setup a 64-
bit WEP key, input 10 HEX format. For example,
‘3132333435’, which is the same with ASCII input ‘12345’.
To setup an 128-bit WEP key, input 26 HEX format. For
example, ‘31323334353637383930313233’, which is the
same with ASCII input ‘1234567890123’. These character
counts result in bit counts of 40 and 104, respectively; the
camera will automatically pad your input to a bit count of 64
or 128.
Network
This option allows you to set up networking configuration. The
default port for communication is via port 80 (HTTP), and you
can change it according to your network configuration.
- SMTP: If you enable the Send snapshot image by email
function in the Application window, you have to configure
the following settings in this field.
• SMTP (mail) server 1/2 – You must enter the mail
server address in the field.
• Recipient email address 1/2 - Enter the e-mail address
of the user who will receive the e-mail.
• Return email address – Enter the e-mail address of the
user who will send the e-mail.
- FTP: If you enable the Upload snapshot image to FTP
server function in the Application window, you have to
configure the following settings in this field.
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trendnet TV-IP300W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trendnet TV-IP300W in the language / languages: English as an attachment in your email.

The manual is 2,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info