541199
16
Zoom out
Zoom in
Previous page
1/52
Next page
30
The default setting for Admin is blank space (Null String). For
security purpose, you are strongly recommended to set the Admin
Password (a maximum of 8 characters) as soon as possible to
enable security function for the camera.
IP Assignment
You can assign a proper IP address for the camera manually. The
default settings are:
IP Address – 192.168.0.30
Subnet Mask – 255.255.255.0
Default Gateway – 0.0.0.0
TIP: Accessing to the camera is done through assigning a
proper IP address. Please make sure to use a vacant IP
address when you assign the IP address for the Internet
Camera. This will prevent errors from occurring if the IP
address is overlapped.
UPnP
UPnP is the architecture for pervasive peer-to-peer network
connectivity of intelligent appliances, wireless devices, and PCs
of all form factors. Check the Enable option to enable the
function of your camera.
DNS IP Address
DNS (Domain Name System) server is an Internet service that
translates domain names into IP addresses. Enter at least one
DNS IP address.
31
Dynamic DNS
Check the Enable option to enable the Dynamic DNS function,
which allows you to run your domain over a changing IP address.
Select one Dynamic DNS provider from the pull-down menu, and
then enter the required information in the following fields,
including the Host Name, User Name, and Password.
Wireless Interface (for wireless model)
If you use a wireless-enabled camera, you can configure the
respective settings in this field, including:
- ESSID: This field is used to setup which wireless network
(ESS-ID, Extended Service Set ID) the camera is to be
connected for communication. The ESS-ID is a unique
identifier shared among all points in a wireless network
environment.
The default Network Name is blank space (NULL String),
and this default setting will allow the camera to connect to
ANY access point under the infrastructure network mode.
To connect the Advanced Wireless Day/Night Internet
Camera Server to a specific access point on the network,
please make sure to set the ESS-ID of the camera to
correspond with the access point’s ESS-ID for
communication. Enter a name in the Network Name box (a
maximum of 32 characters including spaces and symbols, the
punctuation are not allowed).
To connect the camera to an Ad-hoc wireless workgroup,
please make sure to set the same wireless channel and ESS-
ID to match with the computer’s settings for direct wireless
communication under the Ad-hoc wireless workgroup.
- Wireless mode: Use this option to determine the type of
wireless communication for the camera. The available
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trendnet TV-IP300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trendnet TV-IP300 in the language / languages: English as an attachment in your email.

The manual is 2,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trendnet TV-IP300

Trendnet TV-IP300 Quick start guide - German - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info