541202
18
Zoom out
Zoom in
Previous page
1/41
Next page
TV-IP262PI
TRENDnet Users Guide
© Copyright 2012 TRENDnet. All Rights Reserved.
17
IP
Subnet Mask
Default
Network >> Network
IP Setting: This item allows you to select the IP address mode and set up the related
configuration.
DHCP: Select this option when your network uses the DHCP server. When the
camera starts up, it will be assigned an IP address from the DHCP server
automatically. This is the default IP setting on the camera.
Static IP: Select this option to assign the IP address for the camera directly. You
can use IP Setup to obtain the related setting values.
Gateway
default setting is 192.168.10.1.
Primary/
Secondary
DNS
DNS (Domain Name System) translates
domain names into IP addresses. Enter the
Primary DNS and Secondary DNS that are
provided by ISP.
PPPoE: Select this option when you use a direct connection via the ADSL
modem. You should have a PPPoE account from your Internet service
provider. Enter the User Name and Password. The camera will get an IP
address from the ISP as starting up.
NOTE: Once the camera get an IP address from the ISP as starting up, it automatically sends
a notification email to you. Therefore, when you select PPPoE as your connecting type, you
have to set up the email or DDNS configuration in advance.
DDNS Setting: With the Dynamic DNS feature, you can assign a fixed host and
domain name to a dynamic Internet IP address. To set up the DDNS:
1. Select the Enable option to enable this feature.
2. Select the Provider from the pull-down list.
3. Enter the required information in the Host Name, User Name, and Password
boxes.
NOTE: You have to sign up for DDNS service with the service provider before configuring this
feature.
UPnP: The camera supports UPnP (Universal Plug and Play), which is a set of
computer network protocols that enable the device-to-device interoperability. In
addition, it supports port auto mapping function so that you can access the
camera if it is behind an NAT router or firewall.
Select the Enable option to enable this
feature.
UPnP Port Forwarding: select this option to have the port forward to router.
Ports Number
HTTP Port: The default HTTP port is 80.
RTSP Port: Configure the transmission of streaming data within the network.
The default RTSP (Real Time Streaming Protocol) port is 554.
NOTE: If the camera is behind an NAT router of firewall, the suggested to be used is from
1024 to 65535.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trendnet TV-IP262PI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trendnet TV-IP262PI in the language / languages: English as an attachment in your email.

The manual is 3,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trendnet TV-IP262PI

Trendnet TV-IP262PI Quick start guide - English, German - 11 pages

Trendnet TV-IP262PI Quick start guide - Dutch - 9 pages

Trendnet TV-IP262PI Quick start guide - French - 11 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info