541237
5
Zoom out
Zoom in
Previous page
1/65
Next page
© Copyright 2014 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TPL-410AP / TPL-410APK
3
Side View
Note: Powerline (PL) LED color indicates the strength and quality of the Powerline
connection through the electrical system.
Note: The following factors may affect the Powerline network’s connection quality:
Noise Generated by appliances which use your electrical system (e.g.
Microwaves, ovens, blow dryer, iron, dishwasher, etc.). The quality of your
household electrical wiring may also cause additional noise on your electrical
system.
Distance Long lengths of electrical wiring through your electrical system between
connected Powerline adapters.
Button Action Function
Sync /
Reset
(see the
section
Using the
Sync Button
for
instructions)
Sync
Push/hold for 3
seconds,
then release
Initiate Sync/Connection and generate random network
name/key (PL LED will start blinking).
Note: The secondary or additional Powerline adapter’s
Sync button must also be pushed within 2 minutes (120
sec) of pushing the Sync button on the first adapter in
order to establish connectivity.
Reset
Push/Hold for 10
seconds,
then release
Reset device to factory defaults (PWR, PL, and WIFI LEDs
will turn off and turn back on to indicate reset).
Note: Will reset to the factory default private network
name “HomePlug AV”.
WPS
WPS
Push/Hold for 3
seconds, then release
Activates WPS (Wi-Fi Protected Setup). The PWR
(Power) LED will blink to indicate WPS has been
successfully activated.
LED Color Sequence Definition
PWR (Power)
Green Solid Device powered on
Green Blinking WPS is activated
N/A Off Device powered off
WIFI (Wireless)
Green Blinking Wireless enabled, data transmitting/receiving
N/A Off Wireless disabled
PL (Powerline)
Green
Solid Powerline connected (Connection quality is Best)
Blinking
Syncing or Powerline data transmitting/receiving
(Connection quality is Best)
Amber
Solid Powerline connected (Connection quality is Better)
Blinking
Powerline data transmitting/receiving (Connection
quality is Better)
Red
Solid Powerline connected (Connection quality is Good)
Blinking
Powerline data transmitting/receiving (Connection
quality is Good)
N/A Off Powerline is not synced or connected
LAN Ports 1-2
(Ethernet
Connection)
Green
Solid
10/20 Mbps , 100/200Mbps
(Half/Full Duplex) connected
Blinking
10/20 Mbps , 100/200Mbps
(Half/Full Duplex) data transmitting/receiving
N/A
Off Port disconnected/no Ethernet link
Power Prong
On/Off Power
Switch (Powers
device on or
off.)
Sync/Reset
Button
WPS Button
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trendnet TPL-410AP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trendnet TPL-410AP in the language / languages: English as an attachment in your email.

The manual is 2,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trendnet TPL-410AP

Trendnet TPL-410AP Quick start guide - German - 8 pages

Trendnet TPL-410AP Quick start guide - Dutch - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info