541084
11
Zoom out
Zoom in
Previous page
1/30
Next page
TPL-4052E User’s Guide Securing Your Powerline Network
© Copyright 2013 TRENDnet. All rights reserved.
9
Conguring an addional Powerline Adapter to connect and
use the network name of your exisng powerline network:
Note: Use the Sync buon procedure below if you are connecng
TRENDnet Powerline models TPL-401E, TPL-402E, TPL-405E , TPL-406E ,
TPL-407E or TPL-4052E.
1� Verify that all exisng Powerline Adapters are already installed and
connected�
Prepare your adapter:
2� Push and hold the Sync buon on the addional Powerline Adapter
for 15 seconds and then release it. All LEDs will turn o and turn
back on. This will erase the current network name assigned to the
addional Powerline Adapter.
Start associaon:
3� Push and hold the Sync buon on one of the exisng Powerline
Adapters connected to your powerline network for 2 seconds and
then release it. The Power (PWR) LED will start blinking.
4� Within 2 minutes, push and hold the Sync buon on the addional
Powerline Adapter for 2 seconds and release it. The Power
(PWR) LED will start blinking. This will recongure your addional
Powerline Adapter to connect and use the network name of your
exisng powerline network. All LEDs will turn o and turn back on
and the Powerline (PL) LED will turn on the adapters are connected.
Congure to add addional Powerline Adapters to your exisng
powerline network, repeat the steps above for each adapter.
Using the Powerline Ulity
The Powerline Ulity allows you doing following jobs:
1� Create a customized network name for your powerline network
and apply it to mulple Powerline Adapters at the same me.
2� View Powerline Adapters connected to your network (using
the MAC address) and the approximate connecon quality and
speed of each Powerline Adapter.
3� View and upgrade Powerline Adapter rmware.
Note: Link speed displayed in the ulity of your Powerline
Adapters to another through your electrical system is esmated.
Actual link speed may vary.
Beforeinstallingandusingtheulity,pleaseensurethefollowing:
1. Write down the DevicePassword(DPW) (16-digit characters
A-Z only) and MAC Address (12-digit characters a-f, A-F, 0-9) of
each Powerline Adapter as this will be required to change the
network name for mulple Powerline Adapters. See “Product
informaon on device label” on page 2.
2. Make sure your computer in which you are installing the ulity
is connected to your network and your Powerline Adapters are
also connected to your network.
3. If you have changed your network name using the Sync buon
and you are creang a customized network name, it is required
to reset all powerline devices to factory defaults using the
physical Reset buon on your Powerline Adapter before using
the ulity. See”Push Buons” on page 3.
4. Please ensure that your Powerline Adapters are already
installed and connected and the Ethernet port on each adapter
is connected to a device powered on.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trendnet TPL-4052E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trendnet TPL-4052E in the language / languages: English as an attachment in your email.

The manual is 3,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info