541084
7
Zoom out
Zoom in
Previous page
1/30
Next page
TPL-4052E User’s Guide Installing Your Powerline Adapter
© Copyright 2013 TRENDnet. All rights reserved.
5
Installing Your Powerline Adapter
Before you install
1. Before you proceed with the installaon, verify the following:
• Verify that you already have Internet access through your
exisng network.
• Verify that you have an available Ethernet port (also known as a
LAN port) on you router.
• Verify that you have at least two Powerline Adapters. Two or
more Powerline Adapters are required to create a powerline
network�
Note: The TPL-4052E package only includes a single Powerline
Adapter. Please ensure that your other Powerline Adapter is
HomePlug® AV or IEEE 1901 compliant (e.g. TRENDnet models
TPL-401E, TPL-402E, TPL-405E , TPL-406E , TPL-407E or another
TPL-4052E.)
2. Plan the locaon of where you will install your Powerline Adapters.
• Avoid plugging the adapters into power strips, extension cords,
or surge protectors as this may prevent the adapter from
funconing correctly or degrade performance.
• Avoid plugging the adapters into wall power outlets that are
controlled by a light switch to prevent the Powerline Adapter
from being turned o accidentally.
• Avoid plugging the adapters into wall power outlets that
are located near appliances that consume a lot of power
(e.g. refrigerators, washers, dryers) as this may degrade
performance�
• Make sure there is an available wall power outlet in the room
where the router is installed and also near the router.
• Make sure there is an available wall power outlet in the room
where you want to extend network connecvity.
Connecng a Powerline Adapter to your router
1. Plug the Powerline Adapter into an available wall power outlet near
your router
Note: This will allow devices connected to your powerline network to
access the Internet and other devices connected to your network.
2. Connect the included Ethernet cable (also called a network cable)
from the Ethernet port (also called network port) of your Powerline
Adapter to an available Ethernet port (also called LAN port) on your
router
3. Once the Powerline Adapter is installed and connected to your
router, verify that the Power (PWR) LED is on or blinking and the
Network LED is on or blinking.
TPL-4052E
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trendnet TPL-4052E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trendnet TPL-4052E in the language / languages: English as an attachment in your email.

The manual is 3,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info