541408
30
Zoom out
Zoom in
Previous page
1/59
Next page
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-810DR
30
To configure multiple SSID on your router:
1. Log into your router management page (see “Access your router management page
on page 16).
2. Click on the Advanced tab.
3. Select the wireless band you would like to configure Wireless 2.4GHz or Wireless
5GHz and click on Multiple SSID.
4. Review the Multiple SSID settings, click Apply when finished.
Enabled: Check the option to enable the Guest Network. Select a schedule rule you
would like to apply to your wireless network. (See “Create Schedule
” section on
page 34) or select Always to have radio always on.
Wireless Name (SSID): This acronym stands for Service Set Identifier and is the
name of your wireless network. It differentiates your wireless network from others
around you. It is recommended to use a different name from your primary wireless
network to a name that you can easily identify and differentiate from the primary.
You can reference your guests to access this network instead of the primary.
5. Under Security Policy, you can apply a different wireless security type and key to the
guest network. Please refer to
How to choose the type of security for your wireless
network page 11 to find out about different security types and Secure your wireless
network page 12 for wireless security configuration.
Note: You can repeat the steps to enable and configure additional SSIDs. You can
configure your wireless security settings for the additional SSIDs under Wireless
(2.4GHz or 5GHz)>Security. Under the Security Policy section, click the Wireless
Name (SSID) drop-down list to select the additional SSIDs to configure. Please refer
to page 15 to find out about different security types and page 16 for wireless
security configuration.
Wireless bridging using WDS (Wireless Distribution System)
Advanced > Wireless (2.4GHz or 5GHz) > WDS
Wireless bridging using WDS allows the device to create a wireless bridge with other
WDS supported wireless routers and access points configured in WDS mode to bridge
groups of network devices together wirelessly. Simultaneously, the router will also
function in access point mode allowing wireless client devices such as computers, game
consoles, mobile phones, etc. to connect in order to access network resources from
multiple groups of network devices as well as the Internet.
Note: You can create up to four WDS bridge connections on each wireless band
(2.4GHz and 5GHz). WDS (Wireless Distribution System) is not currently
standardized and may not connect to different model wireless routers or access
points, therefore, when using WDS, it is recommended to use the same model and
version for wireless bridging.
By default, your router functions in Access Point mode to allow wireless client devices to
connect and access your network resources and access the Internet.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trendnet TEW-810DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trendnet TEW-810DR in the language / languages: English as an attachment in your email.

The manual is 1,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trendnet TEW-810DR

Trendnet TEW-810DR Quick start guide - German - 8 pages

Trendnet TEW-810DR Quick start guide - Dutch - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info