541579
22
Zoom out
Zoom in
Previous page
1/58
Next page
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-752DRU
19
Advanced wireless settings
Wireless > Advanced
These settings are advanced options that can be configured to change advanced
wireless broadcast specifications. It is recommended that these settings remain set to
their default values unless you are knowledgeable about the effects of changing these
values. Changing these settings incorrectly can degrade performance.
Transmit Power: This setting allows you to adjust the wireless transmit power to a
lower setting. In busy wireless environments, lowering the transmit power may
improve better performance and connectivity and decrease interference with
neighboring wireless networks.
Beacon Period: A beacon is a management frame used in wireless networks that
transmitted periodically to announce the presence and provide information about
the router’s wireless network. The interval is the amount time between each
beacon transmission.
Default Value: 100 milliseconds (range: 20-1000)
Preamble Type: Select the option that works best for your installation. It may be
best to keep this option at its default setting.
o Short Preamble: Using a short guard interval can increase throughput. However,
it can also increase error rate in some installations, due to increased sensitivity to
radio-frequency reflections.
o Long Preamble: Using a long preamble can help to decrease the error rate in
wireless data transmission and receiving.
Access Control Filters
Access control basics
MAC Address Filters
Access > MAC Filters
Every network device has a unique, 12-digit MAC (Media Access Control) address. Using
MAC filters, you can allow or deny specific computers and other devices from using this
router’s wired or wireless network. You can enter up to 24 MAC address entries.
1. Log into your router management page (see “Access your router management page
on page 25).
2. Click on Access, click on MAC Filters.
3. Review the MAC Filter options, click Save Settings to save settings.
Click the Configuring MAC Filtering below drop-down list to choose the MAC filter
function.
Turn MAC Filtering OFF: disables the MAC address filter.
Turn MAC Filtering ON and ALLOW computers listed to access the network Only
Allow computers/devices with MAC addresses listed to access the router
management page and the Internet. Deny all others. Turn MAC Filtering ON and
DENY computers listed to access the network
Only Deny computers/devices with MAC addresses listed to access to the
router management page and the Internet. Allow all others.
Note: MAC filter can be configured to allow access to the listed MAC address and
deny all others unlisted or vice versa. The recommended function is to choose to
only allow access to the MAC addresses listed and deny all others unlisted because
it is easier to determine the MAC addresses of devices in your network then to
determine which MAC addresses you do not want to allow access.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trendnet TEW-752DRU at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trendnet TEW-752DRU in the language / languages: English as an attachment in your email.

The manual is 1,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trendnet TEW-752DRU

Trendnet TEW-752DRU Quick start guide - German - 10 pages

Trendnet TEW-752DRU Quick start guide - Dutch - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info