541580

Trendnet TEW-751DR Manual

37
Zoom out
Zoom in
Previous page
1/61
Next page
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-751DR
37
3. Review the virtual server settings. Click Save Settings to save settings.
Check the option to the left most of the entry to enable and uncheck to disable.
• Name – Enter a name for the virtual server.
Note: You can also click the Application Name drop-down list to select from a
predefined list of applications and click << to copy the information into the fields.
• IP Address: Enter the IP address of the device to forward the port (e.g.
192.168.10.101).
Note: You can also click the Computer Name drop-down list to select a computer
from the DHCP client list and click << to copy the information into the field.
• Public Port – Enter the port number used to access the device from the Internet.
• Private Port – Enter the port number required by your device. Refer to the
connecting device’s documentation for reference to the network port(s) required.
• Protocol: Select the protocol required for your device. TCP, UDP, Both (TCP and
UDP), or Other to define a non-listed protocol.
Note: The Public Port can be assigned a different port number than the Private
Port (also known as port redirection), however it is recommended to use the same
port number for both settings. Please refer to the device documentation to
determine which ports and protocols are required.It is recommended to assign a
static IP address to the device or use DHCP reservation to ensure the IP address of
the device does not change.
• Schedule: Select the defined schedule you would like to have the rule to be
applied (see “Create Schedule
” section on page 35).
• Inbound Filter: Select the defined IP address range to allow access. (see “Inbound
Filter” section on page 40).
Example: To forward TCP port 80 to your IP camera
1. Setup DynDNS service (see Identify Your Network
section page 33).
2. Access TRENDnet IP Camera management page and forward Port 80 (see product
documentation)
3. Make sure to configure your network/IP camera to use a static IP address.
Note: You may need to reference your camera documentation on configuring a static IP
address.
4. Log into your router management page (see “Access your router management page
”
on page 25).
5. Click on Access, and click on Virtual Server.
6. Check the option next to the virtual server entry to enable.
7. Under Name, click the Application Name drop-down list and select the predefined
HTTP entry, then click << to copy the application information to the fields.
8. Next to IP Address, enter the IP address assigned to the camera. (e.g. 192.168.10.101)
9. Next to Protocol, make sure TCP is selected in the drop-down list.
10. The Private Port and Public Port, make sure port number 80 is configured for both
settings.
11. To save the changes, click Save Settings.
… 37 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trendnet TEW-751DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trendnet TEW-751DR in the language / languages: English as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trendnet TEW-751DR

Trendnet TEW-751DR Quick start guide - German - 10 pages

Trendnet TEW-751DR Quick start guide - Dutch - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info