541580

Trendnet TEW-751DR Manual

24
Zoom out
Zoom in
Previous page
1/61
Next page
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-751DR
24
Firewall Rules
Access > Firewall & DMZ
You may want specify inbound or outbound access control to allow/deny sources (or
Internet IP addresses) to your network from the Internet or from computers or devices
on your network to the Internet. Firewall rules may allow for more granular control of
specific inbound and outbound access between your network and the Internet. It is
recommended that these settings remain set to default unless you are knowledgeable
about the effects of changing the firewall rule configuration. It is possible to have
undesirable functionality from your router if these settings are improperly modified. You
can enter up to 32 firewall rule entries.
1. Log into your router management page (see “Access your router management page
”
on page 25).
2. Click on Access, click on Firewall & DMZ.
3. Review the settings under Firewall Rules section. Click Save Settings to save settings.
Check the box next to the firewall rule entry to enable it. Uncheck the option to disable
the firewall rule entry.
• Name – Enter a name for the firewall rule.
• Action – Select Allow will allow access and selecting Deny will block or deny
access.
• Interface (Source) - Click the drop-down list and select LAN (from your network)
or WAN (from the Internet) depending on where the traffic will be coming from.
• IP Address (Source) – Enter the IP address or IP address range to apply the
protocol (e.g. 192.168.1.20-192.168.1.20 or 192.168.1.20-192.168.1.30). To
specify all IP address, enter an asterisk * .
Note: The filter will not be applied to IP addresses outside of the range specified.
• Interface (Destination) - Click the drop-down list and select LAN (your network)
or WAN (Internet) depending on where the traffic will be coming from.
• IP Address (Destination) - Enter the IP address or IP address range to apply the
protocol (e.g. 192.168.10.20-192.168.10.20 or 192.168.10.20-192.168.10.30). To
specify all IP address, enter an asterisk * .
• Protocol – Select the protocol type to filter. TCP, UDP, ICMP, or All.
• Port Range: If selecting TCP or UDP protocol, enter the port number or range of
port numbers to apply in the firewall rule. (e.g. 80-80 or 20-21). For all ports, use
the port range 1 - 65535.
• New Schedule: Click the drop-down list to select the pre-defined schedule to
apply. The filter will only be active during the time period defined in the pre-
defined schedule. (See “Create Schedule
” section on page 35).
Note: Before applying scheduling, please ensure your Time settings are configured
correct and you have defined a schedule. See page 34 to configure Time Settings
and see page 35 to create a schedule.
… 24 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trendnet TEW-751DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trendnet TEW-751DR in the language / languages: English as an attachment in your email.

The manual is 1,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trendnet TEW-751DR

Trendnet TEW-751DR Quick start guide - German - 10 pages

Trendnet TEW-751DR Quick start guide - Dutch - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info