Manual Trendnet TEW-732BR (page 32 of 48) (English)

541578

Zoom out

Zoom in

1/48

TRENDnet User’s Guide

TEW-732BR

Add static routes to your router

Routing > Static

You may want set up your router to route computers or devices on your network to

other local networks through other routers. Generally, different networks can be

determined by the IP addressing assigned to those networks. Generally speaking and for

the case of an example, your network may have 192.168.10.x IP addressing and another

network may have 192.168.20.x IP addressing and because the IP addressing of these

two networks are different, they are separate networks. In order to communicate

between the two separate networks, static routing needs to be configured. Below is an

example diagram where routing is needed for devices and computers on your network

to access the other network.

Note: Configuring this feature assumes that you have some general networking

knowledge.

1. Log into your router management page (see “Access your router management page”

on page 21).

2. Click on Routing, and click on Static.

3. Review the static route settings.

• Network Address: Enter the IP network address of the destination network for the

route. (e.g. 192.168.20.0)

• Network Mask: Enter the subnet mask of the destination network for the

route.(e.g. 255.255.255.0)

• Gateway Address: Enter the gateway to the destination network for the route.(e.g.

192.168.10.2)

• Interface: Click the drop-down list and select the Interface on your router where

the route is active. (e.g. LAN)

• Metric: Enter the metric or priority of the route. The metric range is 1-16, the

lowest number 1 being the highest priority. (e.g. 1 )

• Add: Saves the static route.

To modify an existing reservation, click on the entry in the static route list. When

selected, the entry will be highlighted.

• Update: Saves changes to an existing static route.

• Delete: Removes an existing static route.

• Cancel: Discards changes to existing static route.

Router Maintenance & Monitoring

Reset your router to factory defaults

Tools > Settings

You may want to reset your router to factory defaults if you are encountering difficulties

with your router and have attempted all other troubleshooting. Before you reset your

router to defaults, if possible, you should backup your router configuration first, see

“

Backup and restore your router configuration settings” on page 32.

There are two methods that can be used to reset your router to factory defaults.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Trendnet TEW-732BR in the language / languages: English as an attachment in your email.

The manual is 1,27 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trendnet TEW-732BR

Trendnet TEW-732BR Quick start guide - German - 8 pages

Trendnet TEW-732BR Quick start guide - Dutch - 8 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Trendnet TEW-732BR Manual

Product: