541578
18
Zoom out
Zoom in
Previous page
1/48
Next page
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-732BR
17
4. Interference from devices that produce RF (radio frequency) noise can also impact
your signal. Position your wireless devices away from anything that generates RF
noise, such as microwaves, radios and baby monitors.
If possible, upgrade wireless network interfaces (such as wireless cards in computers)
from older wireless standards to 802.11n. If a wirelessly networked device uses an older
standard, the performance of the entire wireless network may be slower. If you are still
experiencing low or no signal consider repositioning the wireless devices or installing
additional access points.
Advanced wireless settings
Wireless > Advanced
These settings are advanced options that can be configured to change advanced
wireless broadcast specifications. It is recommended that these settings remain set to
their default values unless you are knowledgeable about the effects of changing these
values. Changing these settings incorrectly can degrade performance.
Beacon Interval: A beacon is a management frame used in wireless networks that
transmitted periodically to announce the presence and provide information about
the router’s wireless network. The interval is the amount time between each
beacon transmission. Default Value:100 milliseconds (range: 20-1000)
RTS Threshold: The Request To Send (RTS) function is part of the networking protocol.
A wireless device that needs to send data will send a RTS before sending the data in
question. The destination wireless device will send a response called Clear to Send
(CTS). The RTS Threshold defines the smallest data packet size allowed to initiate
the RTS/CTS function. Default Value: 2346 (range: 0-2347)
Fragmentation Threshold: Fragmentation in wireless networks is the process of
breaking down data communications into smaller data packets in order to improve
data efficiency when transferring or receiving data between wireless devices. The
fragmentation threshold defines the maximum size of the data packets that are
broken down. Default Value: 2346 (range: 256~2346, even numbers only)
DTIM Interval: A Delivery Traffic Indication Message (DTIM) is an informational
message that is sent as part of a beacon by an access point (your wireless router) to
a wireless client (wireless device or connecting station) in sleep mode to provide an
alert that data is awaiting delivery. The DTIM Interval (also called Data Beacon Rate)
is the amount of time between DTIM transmissions included in part of a beacon.
Default Value: 1 (range: 1-255)
Access Control Filters
Access control basics
Access > Filter
MAC address filters
Access > Filter > MAC Filters
Every network device has a unique, 12-digit MAC (Media Access Control) address. Using
MAC filters, you can allow or deny specific computers and other devices from using this
router’s wired or wireless network.
1. Log into your router management page (see “
Access your router management page
on page 21).
2. Click on Access, click on Filter, and click on MAC Filters.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trendnet TEW-732BR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trendnet TEW-732BR in the language / languages: English as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trendnet TEW-732BR

Trendnet TEW-732BR Quick start guide - German - 8 pages

Trendnet TEW-732BR Quick start guide - Dutch - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info