541582
26
Zoom out
Zoom in
Previous page
1/73
Next page
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-718BRM
23
Additional Wireless Settings
Advanced > Advanced Wireless
These settings are advanced options that can be configured to change advanced
wireless broadcast specifications. It is recommended that these settings remain set to
their default values unless you are knowledgeable about the effects of changing these
values. Changing these settings incorrectly can degrade performance.
1. Log into your router management page (see “Access your router management page
on page 35
).
2. Click on Advanced, and click on Advanced Wireless.
Regulatory Domain The channel region assigned (FCC 1~11 or ETSI 1~13).
This setting cannot be modified and is displayed for informational purposes.
Beacon Interval A beacon is a management frame used in wireless networks
that transmitted periodically to announce the presence and provide
information about the router’s wireless network. The interval is the amount
time between each beacon transmission.
Default Value:100 milliseconds (range: 1-1000)
Transmit PowerThe wireless transmit power can be modified to a lower
setting such as 50%, 25%, and 12% if necessary. Lowering the wireless transmit
may help to better stabilize the wireless connectivity and reduce the effects of
wireless interference in areas where there are several 2.4GHz wireless devices.
(Default: 100%)
RTS ThresholdThe Request To Send (RTS) function is part of the networking
protocol. A wireless device that needs to send data will send a RTS before
sending the data in question. The destination wireless device will send a
response called Clear to Send (CTS). The RTS Threshold defines the smallest
data packet size allowed to initiate the RTS/CTS function.
Default Value: 2347 (range: 256-2346)
Fragmentation Fragmentation in wireless networks is the process of
breaking down data communications into smaller data packets in order to
improve data efficiency when transferring or receiving data between wireless
devices. The fragmentation threshold defines the maximum size of the data
packets that are broken down.
Default Value: 2346 (range: 1500~2346, even numbers only)
DTIM Interval A Delivery Traffic Indication Message (DTIM) is an
informational message that is sent as part of a beacon by an access point (your
wireless router) to a wireless client (wireless device or connecting station) in
sleep mode to provide an alert that data is awaiting delivery. The DTIM Interval
(also called Data Beacon Rate) is the amount of time between DTIM
transmissions included in part of a beacon.
Default Value: 1 (range: 1-255)
WMM CapableWi-Fi Multimedia is a Quality of Service (QoS) feature which
prioritizes audio and video data packets. This feature requires the wireless
device to also support WMM. Click Enable (recommended) or Disable to turn
this feature on or off on your router.
Tx Rates The wireless transmission rates can be locked down on the device
for testing/troubleshooting or may even stabilize wireless connectivity if
wireless connectivity issues are encountered. Using the default setting “Best”
will allow the device to automatically the best possible data rate achievable.
(Rates (Mbps): 1 , 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54, MCS0~MCS23).
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trendnet TEW-718BRM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trendnet TEW-718BRM in the language / languages: English as an attachment in your email.

The manual is 2,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trendnet TEW-718BRM

Trendnet TEW-718BRM Quick start guide - German - 9 pages

Trendnet TEW-718BRM Quick start guide - Dutch - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info