541582
6
Zoom out
Zoom in
Previous page
1/73
Next page
© Copyright 2013 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-718BRM
3
Front View
Status LED - This LED indicator is blinking green when your modem router is
ready and working successfully. If this LED indicator is solid green on or off,
your router is not receiving power or ready, or not working properly.
ADSL WAN (Link/Activity) LED This LED indicator is blinking green when the
ADSL status of the modem router is ready to establish connection to your ISP.
The LED indicator will turn solid green when the modem router has been
properly configured with the settings provided by your ISP and successful ADSL
connection has been made to your ISP. This LED indicator will be blink while
data is transmitted or received through the ADSL port of your modem router.
WLAN (Link/Activity) LED This LED indicator is solid green when the wireless
is “On” and functioning properly on your modem router. This LED indicator will
be blinking while data is transmitted or received by your wireless clients or
wireless network devices connected to your modem router. This LED indicator
will be off when the wireless functionality of your modem router is disabled.
LAN 1-4 (Link/Activity) LEDs These LED indicators are solid green when the
LAN ports are successfully connected to your wired network devices (which are
turned on). These LED indicators will blink green while data is transmitted or
received through your modem router’s LAN ports.
WPS/Reset/WLAN Button This button has multiple functions depending on
the amount of time it is pushed and released.
o WPS (Wi-Fi Protected Setup) Push and hold this button for 3
seconds and release to activate WPS. Within 2 minutes, push and hold
the WPS button on your wireless client device. WLAN LED indicator
will blink rapidly to indicate that WPS has been activated.
o Reset Push and hold this button for 15 seconds and release to reset
your router to its factory defaults. Status LED indicator will blink
rapidly after released to indicate the reset process has started.
o WLAN (On/Off) Push and hold this button for 10 seconds and release
to disable or enable the wireless functionality of your modem router.
The Status LED will start to blink rapidly and the WLAN LED indicator
will turn off (disabled) or turn on (enabled) to indicate the status of
the wireless functionality of your modem router.
WPS Button/
Reset Button/
WLAN (On/Off)
WLAN
LED
Status
LED
ADSL
LED
LAN 1-4
LEDs
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trendnet TEW-718BRM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trendnet TEW-718BRM in the language / languages: English as an attachment in your email.

The manual is 2,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trendnet TEW-718BRM

Trendnet TEW-718BRM Quick start guide - German - 9 pages

Trendnet TEW-718BRM Quick start guide - Dutch - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info