541686
27
Zoom out
Zoom in
Previous page
1/43
Next page
© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-716BRG
26
Prioritize traffic using QoS (Quality of Service)
Advanced Setting > QoS
You may want to prioritize outbound traffic for specific computers or devices on your
network to have higher priority.
1. Log into your router management page (see “
Access your router management page
on page 18).
2. Click on Configuration at the top of the page, click on Advanced Setting, and click on
QoS.
3. Next to QoS Control, check the Enable option.
4. Next to Bandwidth of Upstream, enter the maximum upload speed in kbps you have
available from you ISP (Internet Service Provider).
Note: You can check your ISP for the maximum available upload speed you have
available or you can run an Internet speed tests available on the Internet to determine
the estimated value.
5. Review the QoS rule settings below.
Local IP : Ports The IP address and port of the local device on your network.
(Port range to use: 1-65535)
Note: Typically, for the local device, it is recommended to specify all ports. To specify
all ports, do not enter a value in the Port field.
Remote IP : Ports The IP address and port of the remote device on destination on
the Internet. (Port range to use: 1-65535)
Note: You will need to specify the ports to apply QoS.
QoS Priority Choose from three priority queues to apply, High, Normal, and Low.
EnableCheck the option to enable the QoS rule.
Use Rule#Allows you to specify a pre-defined schedule when the QoS rule is
activated.
Note: To define a schedule, see the “Create schedules” section.
To save changes, click Save at the bottom of the page.
Note: If you would like to discard the changes, click Undo before you click Save.
Create schedules
Advanced Setting > Scheduling
For additional security control, your router allows you to create schedules to specify a
time period when a feature on your router should be activated and deactivated. Before
you use the scheduling feature on your router, ensure that your router system time is
configured correctly. See page 51 to configure the system time.
Note: You can apply a predefined schedule to the following features:
Wireless
Virtual Server
Packet Filters
QoS
To create a schedule to define a time period when a feature should be activated:
1. Log into your router management page (see “
Access your router management page
on page 18).
2. Click on Configuration at the top of the page, click on Advanced Setting, and click on
Scheduling.
3. Next to Schedule, check the Enable option.
4. Click Save at the bottom of the page.
27


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trendnet TEW-716BRG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trendnet TEW-716BRG in the language / languages: English as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trendnet TEW-716BRG

Trendnet TEW-716BRG Quick start guide - German - 9 pages

Trendnet TEW-716BRG Quick start guide - Dutch - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info