541686

Trendnet TEW-716BRG Manual

18
Zoom out
Zoom in
Previous page
1/43
Next page
© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-716BRG
17
• Destination IP : Ports – Enter the destination IP address of the computer/device
located on the Internet and port number to apply the filter. To specify all port
numbers, do not specify any value for Ports field. For specific port numbers, enter
a port number or range within the range of 1-65535 (e.g. 21 or 21-30) in the Ports
field.
Note: Typically, you can specify 0.0.0.0 for any destination IP address located on
the Internet or enter the specific IP address. (e.g. 10.10.10.200)
• Protocol – Select the protocol type to filter. TCP, UDP, or you can select Both to
choose both protocol types.
• Enable – Check the option to enable the filter.
• Use rule# - Click the drop-down list to select a pre-defined schedule. The filter
will only be active during the time period defined in the pre-defined schedule.
Note: Before applying scheduling, please ensure your Time settings are configured
correct and you have defined a schedule. See page 51 to configure Time Settings
and see page 65 to create a schedule.
To save changes, click Save at the bottom of the page.
Note: If you would like to discard the changes, click Undo before you click Save.
Clicking MAC Level will bring you to the MAC Control configuration page. See MAC
Control section.
Inbound Packet Filter
You may want apply inbound packet filters to allow or deny access of specific traffic
from the Internet to computers or devices on your local network.
To configure inbound packet filters:
Click Inbound Filter at the bottom of the outbound packet filter page.
Next to Inbound Packet Filter, check the Enable option to enable inbound filtering.
• Select Allow all to pass except those match the following rules to allow all traffic
and deny only the filters specified in the list.
• Select Deny all to pass except those match the following rules to deny all traffic
and allow only the filter specified in the list.
Review the inbound packet filter settings.
• Source IP – Enter the source IP address or computer/device IP address on your
located on the Internet to apply the filter. (e.g. 192.168.10.101)
Note: Typically, you can specify 0.0.0.0 for any source IP address located on the
Internet or enter the specific IP address. (e.g. 10.10.10.200)
• Destination IP : Ports – Enter the destination IP address of the computer/device
located on your local network and port number to apply the filter. To specify all
port numbers, do not specify any value for Ports field. For specific port numbers,
enter a port number or range within the range of 1-65535 (e.g. 21 or 21-30) in the
Ports field.
• Protocol – Select the protocol type to filter. TCP, UDP, or you can select Both to
choose both protocol types.
• Enable – Check the option to enable the filter.
• Use rule# - Click the drop-down list to select a pre-defined schedule. The filter
will only be active during the time period defined in the pre-defined schedule.
Note: Before applying scheduling, please ensure your Time settings are configured
correct and you have defined a schedule. See page 51 to configure Time Settings
and see page 65 to create a schedule.
To save changes, click Save at the bottom of the page.
Note: If you would like to discard the changes, click Undo before you click Save.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trendnet TEW-716BRG at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trendnet TEW-716BRG in the language / languages: English as an attachment in your email.

The manual is 1,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trendnet TEW-716BRG

Trendnet TEW-716BRG Quick start guide - German - 9 pages

Trendnet TEW-716BRG Quick start guide - Dutch - 9 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info