541687

Trendnet TEW-712BR Manual

33
Zoom out
Zoom in
Previous page
1/51
Next page
© Copyright 2012 TRENDnet. All Rights Reserved.
TRENDnet User’s Guide
TEW-712BR
32
To simplify configuration, there is a list of commonly used pre-defined virtual server
entries to modify, otherwise, you can choose to manually add a new virtual server.
3. Review the virtual server settings.
• Enabled – Selecting Enabled turns on the virtual server and selecting Disabled
turns off the virtual server.
• Name – Enter a name for the virtual server.
• Protocol – Select the protocol required for your device. TCP, UDP, or you can
select Both to choose both TCP & UDP (recommended).
Note: Please refer to the device documentation to determine which ports and
protocols are required.
• Private Port – Enter the port number required by your device. Refer to the
connecting device’s documentation for reference to the network port(s) required.
• Public Port – Enter the port number used to access the device from the Internet.
Note: The Public Port can be assigned a different port number than the Private
Port (also known as port redirection), however it is recommended to use the
same port number for both settings. Please refer to the device documentation
to determine which ports and protocols are required.
• LAN Server – Enter the IP address of the device to forward the port (e.g.
192.168.10.101).
Note: You should assign a static IP address to the device or use DHCP
reservation to ensure the IP address of the device does not change.
• Add – Saves a new virtual server entry.
• Delete – Removes an existing virtual server.
• Update – Modifies an existing virtual server.
• Cancel – Discard changes to an existing virtual server.
Example: To forward TCP port 80 to your IP camera
1. Setup DynDNS service (See DynDNS section).
2. Access TRENDnet IP Camera management page and forward Port 80 (see product
documentation)
3. Make sure to configure your network/IP camera to use a static IP address or you can
use the DHCP reservation feature (see “
Set up DHCP reservation” on page 28).
Note: You may need to reference your camera documentation on configuring a
static IP address.
4. Log into your router management page (see “
Access your router management page”
on page 24).
5. Click on Access, and click on Virtual Server.
6. In the list below, click the pre-defined virtual server entry named Virtual Server HTTP.
Note: The selected item will be highlighted in yellow when selected.
7. The fields will be populated with the selected pre-defined virtual server entry.
8. Click Enabled to turn on this virtual server.
… 33 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trendnet TEW-712BR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trendnet TEW-712BR in the language / languages: English as an attachment in your email.

The manual is 1,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trendnet TEW-712BR

Trendnet TEW-712BR Quick start guide - German - 8 pages

Trendnet TEW-712BR Quick start guide - Dutch - 8 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info