541303
99
Zoom out
Zoom in
Previous page
1/115
Next page
E
Appendix E
Command Line Interface
Overview
If desired, the Command Line Interface (CLI) can be used for configuration. This creates the
possibility of creating scripts to perform common configuration changes. The CLI requires
either a Telnet connection or a physical connection from your PC to the serial port (RS232 port)
on the Wireless Access Point.
Using the CLI - Telnet
1. Start your Telnet client, and establish a connection to the Access Point.
e.g.
Telnet 192.168.0.228
2. You will be prompted for the user name and password. Enter the same login name and
password as used for the HTTP (Web) interface.
The default values are admin for the User Name, and password for the Password.
3. Once connected, you can use any of the commands listed in the following Command
Reference.
Using the CLI - Serial Port
1. Use a standard serial port cable to connect your PC to the serial (RS232) port on the
Wireless Access point.
2. Start your communications program. For example, in Windows, use HyperTerminal. (This
program may not be installed. If so, you can install it using Start - Settings - Control Panel
- Add or Remove Programs. Then select Windows Setup or Add/Remove Windows Com-
ponents, depending on your version of Windows.)
3. Configure the connection properties:
Name - use a suitable name, such as “AP”
“Port” or “Connect Using” - Select the Serial Port that the cable is connected to.
(Do not select your modem.)
Port Settings - Use 9600, N, 8, 1, with hardware flow control, as shown below.
96
99


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trendnet TEW-453APB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trendnet TEW-453APB in the language / languages: English as an attachment in your email.

The manual is 3,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trendnet TEW-453APB

Trendnet TEW-453APB Quick start guide - German - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info