541577
4
Zoom out
Zoom in
Previous page
1/14
Next page
Anleitung zur Schnellinstallation
TDM-C500
TDM-C504
1.01
Deutsch 1
1. Bevor Sie anfangen 1
2. Installation der Hardware 3
3. Konfiguration des Modems 4
Troubleshooting 7
Table of Contents
Version 10.22.2010
1
1. Bevor Sie anfangen
Packungsinhalt
Systemanforderungen
?
?Treiber-CD mit Bedienungsanleitung
?Mehrsprachige Installationsanleitung
?Kat.5 Ethernet Kabe (1.5m/5ft)
?RJ-11-Telefonkabel (1.8m/6ft)
?Netzteil
TDM-C500 / TDM-C504
?
?Computer mit korrekt installiertem verdrahtetem Netzwerkadapter
?Webbrowser: Internet Explorer (6.0 oder höher)
?USB Typ A zu Typ B Kabel (optional)
Funktionierender DSL-Internetanschluss
Hinweis: Der Treiber für den USB-Port des TDM-C500 ist optional
2
Während der Installation Ihres ADSL Modem Routers wird die ISP-Verbindung
automatisch durch den Setup–Assistenten erkannt. Für den Fall dass der Router die
ISP-Verbindung nicht erkennt, können Sie auch manuell die Verbindung einstellen.
Bitte
vergewissern Sie sich bei Ihrem Internet Service Provider über den Typ der folgenden
DSL-Breitband Verbindungsarten:
1. Kapselung
PPPoA VC-Mux
PPPoA LLC
1483 Bridged IP LLC
1483 Routed IP LLC
1483 Bridged IP VC-Mux
1483 Routed IP VC-Mux
PPPoE VC-Mux
PPPoE LLC
1483 MER LLC
1483 MER VC-Mux
2. VPI/VCI
VPI: _____ (0~255)
VCI: _____ (32~65535)
3. PPP
Benutzername: __________________
Kennwort: ______________________
4. WAN IP
Type: feste IP-Verbindung oder DHCP
Lokale IP-Adresse (feste ): _____. _____._____._____
(z.B. 215.24.24.129) (Optional)
Subnet Mask (feste): _____. _____._____._____ (Optional)
Externe IP-Address (feste): _____. _____._____._____
(z.B. 215.24.24.129) (Optional)
DNS (feste): _____. _____._____._____ (Optional)
Erfassung von Informationen über den Internet Service Provider (ISP)
3
1. Verbinden Sie ein Ende des mitgelieferten
RJ-11-Telefonkabels mit dem ADSL-Port des
TDM-C500 / TDM-C504. Verbinden Sie das
andere Ende des Kabels mit einer Telefondose.
2. Verbinden Sie ein Ende des
RJ-45-Netzwerkkabels mit dem LAN-Port des
TDM-C500 / TDM-C504. Verbinden Sie das
andere Ende des Kabels mit dem Ethernet-Port
des Computers.
3. Verbinden Sie das Netzteil mit dem
TDM-C500 / TDM-C504 und stecken Sie es in
eine Steckdose.
4. Stellen Sie den Einschalter auf “Ein”.
5. Prüfen Sie, dass die folgenden Anzeigen
leuchten: Power (Stromversorgung)(grün),
LAN (grün) und ADSL (grün) .
2. Installation der Hardware
4
4. Konfiguration des Modems
Hinweis:
Informationen zur Konfiguration des Modems über den USB-Port finden Sie in der
Bedienungsanleitung auf der beiliegenden CD. Schließen Sie die Kabel nicht gleichzeitig an den
Netzwerk-und den USB-Port an.
1. Öffnen Sie einen Webbrowser und geben Sie in
die Adressleiste http://192.168.10.1 ein.
Drücken Sie dann auf die Eingabetaste
(Enter).
2. Geben Sie User name (Benutzername) und
Password (Kennwort) ein und klicken Sie auf
OK.
Standardeinstellungen:
User name: admin
Password: admin
Hinweis: Bei Standard-Passwort Eingabe auf
Groß-und Kleinschreibung achten.
3. Klicken Sie auf Setup Wizard
(Installationsassistent).
5
Hinweis:
1. Klicken Sie, wenn Ihr ISP nicht im Auswahlmenü aufgeführt ist, am unteren Bildschirmrand auf
“Config” (Konfiguration) und geben Sie die entsprechenden Informationen Ihres
Internetdienstanbieters ein.
2. Im Beispiel wird eine PPPOE-Verbindung genutzt.
3. Falls Sie für die ADSL-Verbindung die MAC-Adresse Ihres Computers eingeben müssen, finden
Sie entsprechende Hinweise im Abschnitt Problembehandlung.
5. Konfigurieren Sie die Einstellungen
entsprechend den Angaben Ihres ISP. Klicken
Sie dann auf Save (Speichern). Für PPPoE-
Verbindungen müssen Sie Folgendes
konfigurieren:
Benutzername
Kennwort
Typ (feste IP-Verbindung oder DHCP)
Wenn Sie “Fixed IP” (Feste IP-Adresse)
auswählen, müssen Sie die folgenden
Einstellungen konfigurieren
IP-Adresse
Subnet Mask
Externe IP-Adresse
DNS
4. Wählen Sie Ihr Land und Ihren ISP aus der
Dropdown-Liste.
6. Klicken Sie auf OK.
8. Klicken Sie auf OK.
7. Klicken Sie auf Commit and Reboot
(Bestätigen und Neu starten).
6
Die drahtlose Verbindung ist jetzt vollständig konfiguriert.
Hinweis: Weitere Informationen zu den Konfigurations- und erweiterten Einstellungen
der TDM-C500 / TDM-C504 finden Sie im Abschnitt „Problembehandlung“ der
Bedienungsanleitung auf der beiliegenden Dienstprogramm-CD oder auf der Website von
TRENDnet unter www.trendnet.com.
Registrieren Sie Ihr Produkt
TNehmen Sie sich bitte einen Moment Zeit und registrieren Sie Ihr Produkt online, so
dass Sie unsere umfassenden Support- und Kundendienstleistungen in Anspruch
nehmen können: www.trendnet.com/register Vielen Dank für den Kauf eines TRENDnet-
Produkts
9. Warten Sie, bis der TDM-C500 / TDM-C504
neu gestartet ist.
10. Überprüfen Sie nach dem Neustart, dass Sie
auf das Internet zugreifen können. Öffnen Sie
Ihren Webbrowser und geben Sie eine URL
ein (z.B. www.trendnet.com), um zu prüfen,
ob eine Internetverbindung besteht.
1. I typed http://192.168.10.1 in my Internet Browser's Address Bar, but an error message
says “The page cannot be displayed.” How can I get into the TDM-C500 / TDM-C504's web
configuration page?
1. Check your hardware settings again by following the instructions in Section 2.
2. Make sure the Power and LAN lights are lit.
3. Make sure your TCP/IP settings are set to Obtain an IP address automatically (see
the steps below).
Troubleshooting
7
1. Go into the Control Panel, click Network and Internet,
click Network and Sharing Center, click Change
Adapter Settings and then right-click the Local Area
Connection icon and then click Properties.
2. Click Internet Protocol Version 4(TCP/IPv4) and then
click Properties. Then click on Obtain an IP address
automatically.
Windows 7
Windows Vista
Windows XP / 2000
1. Go into the Control Panel, click Network and Internet,
click Network and Sharing Center, click Manage
Network Connections and then right-click the Local
Area Connection icon and then click Properties.
1. Go into the Control Panel, click Network and Internet,
click Network and Sharing Center, click Change
Adapter Settings and then right-click the Local Area
Connection icon and then click Properties.
2. Click Internet Protocol (TCP/IP) and then click
Properties. Then click on Obtain an IP address
automatically.
2. Click Internet Protocol Version 4(TCP/IPv4) and then
click Properties. Then click on Obtain an IP address
automatically.
8
4. Reset the TDM-C500 / TDM-C504. To reset the TDM-C500 / TDM-C504, take a pin or
paperclip and press the reset button on the back of the modem for 15 seconds.
Then let go.
2. I have followed all the steps and still cannot connect to the Internet. What should I do?
1. Verify that your DSL account is valid and activated.
2. Make sure all the cables are properly connected (see Section 2).
3. In Section 3, click Config in the Setup Wizard and configure the modem based on
information provided by your ISP.
3. I forgot my login password. What should I do?
Follow the instructions below:
1.Take a pin or paperclip and press the reset button on the side of the modem for 15
seconds.
2.Wait 15 seconds then let go. This will return all settings to factory default. The default IP
address of the modem is 192.168.10.1. The default user name is “admin”. The default
password is “admin”.
4. My ISP requires me to clone the modem's MAC address. What should I do?
MAC address is the network device's hardware ID and consist of 12 hexadecimal
characters (e.g. 00:12:34:ab:cd:ef). Some ISPs registers the subscriber's computer
network adapter or the DSL modem's MAC address. If this is the case, your options are:
1. Report the TRENDnet modem's MAC address (found on the product label at the bottom
of the modem) to the ISP, or 2. Clone the network adapter or the old DSL modem's MAC
address to the TRENDnet modem. The later is probably the easiest to do and you can
follow the instructions below.
1. With the computer connected to the modem's network port, open the web browser and
go to the modem's setup page http://192.168.10.1.
2. Login with user name and password (default is admin for both).
3. Click on WAN.
4. Click Channel Config.
5. Select Enable from the dropdown list in the MAC Address Clone section.
6. For copying the computer's MAC address to the modem, click on “Clone MAC
address”. For copying the old modem's MAC address, find the modem's MAC address
and then manually enter it in the MAC address box.
7. Click “Apply Changes.”
8. Click on “Commit and Reboot”.
5. Can I connect a computer to the USB port and another computer to the Ethernet port at
the same time?
No, you cannot use the USB and Ethernet port simultaneously.
If you still encounter problems or have any questions regarding the TDM-C500 / TDM-C504, please
contact TRENDnet's Technical Support Department.
Copyright ©2010. All Rights Reserved. TRENDnet.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trendnet TDM-C500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trendnet TDM-C500 in the language / languages: German as an attachment in your email.

The manual is 3,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Trendnet TDM-C500

Trendnet TDM-C500 User Manual - English - 89 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info