541085
11
Zoom out
Zoom in
Previous page
1/14
Next page
9
Q1.
A1.
Q2.
A2.
Q3.
A3.
Q4.
A4.
What do I do if the LEDs on my camera remain off?
Make sure that the power adapter is connected to a power outlet and that your power
outlet is receiving power.
My power outlet is receiving power, but my camera will not turn on. What do I do next?
Unplug the power cord from your power outlet, and open the camera enclosure. Double
check your power supply's connections. Make sure that the yellow connectors are twisted in
a clockwise direction to tighten the contacts between your power cord terminals and power
supply. It's possible that these wires are not getting any contact, so be sure that the yellow
wire connectors are turned in a clockwise direction.
The terminals between my power supply and power cord are making contact, but I still
cannot turn on my camera. What else can I do?
Double-check the connection between the DC plug and DC box. Make sure that the DC
plug's terminals are properly inserted into the DC box, and that the contact is securely
connected to the DC box. Tighten the screws on the DC box by turning the screw clockwise.
Tug the wire to make sure that the DC plug terminals are tightly connected to the DC box.
My camera is receiving power, but I cannot access my camera's web configuration
utility. What should I do?
If you are using a wired IP camera, double check your hardware settings. Make sure
that your network patch cable is connected to your camera and switch. Make sure that the
network patch cable is not faulty, and that your switch is operating properly. If you are using
a wireless camera, make sure that your antenna connection is properly connected to your
camera's antenna connector. Double-check your antenna's position, and make sure that
your antenna is getting direct line of site with your wireless access point.
If you have any questions regarding the 15AH28B, please contact Trendware Technical Support
Department.
Troubleshooting
Certifications
This equipment has been tested and found to comply with FCC and CE Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received.
Including interference that may cause undesired operation.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO
OPERATE THE EQUIPMENT.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trendnet 15-AH28B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trendnet 15-AH28B in the language / languages: English as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info