485457
52
Zoom out
Zoom in
Previous page
1/60
Next page
– 52 –
EN
– 53 –
Settings Only: Use this option to delete the settings you made. The channel and favorite lists
remain unchanged.
Please note: In case the menu looks distorted or is displayed in black and white after the reset of the user settings
or restoration of the factory settings, change the video output as described in the "A
u D i o /vi D e o Se t t i n g S " section.
Preprogrammed Channel Lists: When you select this option, the channel lists are replaced by the
channel lists preprogrammed at the factory.
Antenna Settings•
This menu is explained in Section 3.2.
Channel Search•
This menu is explained in Section 3.3.
System Information•
In this menu, you can obtain information about the hardware version and installed software and
perform a software update.
Product Information: When you select this menu item, information about the hardware version
of your SatCorder and the currently installed software version appears. This information may be
required if you contact our support.
Software Update: If you want to perform a software update on your SatCorder, two methods are
available: via the satellite antenna (OTA) and via the USB interface.
Note: Do not interrupt the data transfer under any circumstances while performing a software update!
Do not switch off the SatCorder during an update and do not remove the USB storage medium or
disconnect your satellite antenna.
Please note: If you install a complete software package (with a bootloader), the user settings and channel
lists are deleted.
Software Update via the Satellite Antenna (OTA)•
You can download software updates automatically while your SatCorder is in standby mode.
For this purpose, select the "a
u t O " setting from the "au t O up g r a d e S " options on the "uS e r pr e f e r e n c e S "
menu. At the first startup after such an update, the SatCorder displays a message on the screen
that an update was performed successfully.
When you perform an OTA software update, your SatCorder first searches for an update signal.
This procedure can last several minutes. During this search, the "S
O f t w a r e up d a t e " message appears
on the screen. To interrupt the search, please press the red function key or the D key on the
remote control. If a new software version is available, you will be informed and asked if you want
to download it. After an additional confirmation prompt to prevent accidental changes to the
system, the download starts.
During the download, an "Ota" window with a progress bar appears on the screen. After the download
of the new software version is complete, your SatCorder starts the update and then performs an
automatic restart. In the case of this type of software update, the user settings and channel lists
usually remain unchanged.
Please note: OTA software updates are broadcast through the ASTRA 19.2E satellite. Make sure that your
satellite system is oriented toward this satellite.
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trekstor neptune at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trekstor neptune in the language / languages: English, German as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info