485457
46
Zoom out
Zoom in
Previous page
1/60
Next page
– 46 –
EN
– 47 –
4.8 Standby Mode
If you are not using your SatCorder, you can reduce the power consumption by placing it in standby mode.
Standby mode lets you reactivate it quickly. In standby mode, a display of the current time appears on the
display of your SatCorder. Programmed recordings are carried out when the SatCorder is in standby mode.
Please note: To switch off the SatCorder completely and prevent unnecessary power consumption, please
turn off your SatCorder using the mains switch on the back side. Please observe that no programmed recordings
can be carried out while the mains switch is set to "
o F F ".
4.9 Recording and Playback of Programs
Connecting a USB 2.0 Mass Storage Device
Your SatCorder has a USB 2.0 port on the back side. You can connect an external USB 2.0 hard disk
(e.g. a TrekStor DataStation) or a USB stick.
If you connect a suitable USB 2.0 mass storage device, a message appears during the initialization of the
storage device and once it has been successfully recognized. With a connected external USB 2.0 hard
disk, you can use the versatile recording and playback functions of your SatCorder optimally. For this
reason, the following assumes that an external USB 2.0 hard disk is being used for recordings.
Please note: The file system of the external USB 2.0 hard disk must be FAT32.
Please note: Please always unmount your USB 2.0 mass storage device prior to removing it. This is done by
pressing the yellow function key on your remote control.
Time Shift
If you want to interrupt a television program in progress, just press the Q key on your remote control.
The SatCorder immediately starts to record the program in progress on the connected USB 2.0 hard disk.
A freeze frame of the moment in which you interrupted the program and the time shift counter appear
on the screen. To continue the playback at the position at which you stopped, press the Q key again.
Instant Replay
If you press the V key of the remote control, the last 30 seconds of the playback of a time shift
recording in progress is repeated. If you activate the "i
n S t a n t re p l a y " function in the "pVr Se t t i n g S " menu,
the V key also works during the normal playback of the television program as soon as the selected
channel has been running for at least 30 seconds.
Record
With your SatCorder, you can record the current program as well as programming timed recordings
by pressing the O key.
If you want to record the current program, you have two possibilities:
Endless recording: Start the recording by pressing the O key on the remote control. To stop the
recording, press the P key.
Recording with automatic ending: When the information display is visible, the end time of the
current program is set according to the data given in the EPG.
If you want to plan your recordings in advance, you can use the EPG or Personal Planner for this purpose.
46


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trekstor neptune at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trekstor neptune in the language / languages: English, German as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info