485457

Trekstor neptune Manual

41
Zoom out
Zoom in
Previous page
1/60
Next page
– 40 –
– 41 –
EN
Motor System•
If you have connected a motorized satellite antenna to your SatCorder, please use this option
("m
O t O r i z e d ") to set which signals are sent to the motor.
Motorized Dish
If you have selected one of the options for a motorized satellite antenna and pressed the yellow function
key on your remote control, a new menu opens. Here you can set and adjust the position of a satellite.
You can use the bar displays for this purpose. Use the colored keys on your remote control to move
the satellite antenna and define the limits. The functions of the individual keys are shown at the
bottom of the screen.
Using the yellow "r
e c a l c u l a t e " key, you can recalculate all satellite positions when the basic position
of the satellite antenna has changed. If you move the satellite antenna, just set the position of one
satellite and then press the yellow function key. Your SatCorder will then automatically calculate
the right positions for all other satellites.
Satellite•
Here you can select the satellite whose position you want to set.
Reference Transponder•
Here you can set which transponder is used as the reference.
Move Dish•
With this option, you can set the movement speed of the satellite antenna to "f
i n e " or "cO a r S e ".
Limits•
Here you can turn the set limits on or off.
Satellite settings•
Under this menu item, you can add satellites to the satellite list, delete them, or, if you use a motorized
satellite antenna, set the motor position of the individual satellites. For this purpose, use the keys of
your remote control shown at the bottom of the screen.
LOF Low and High Band•
Using this option, you can set the upper ("u
p p e r lOf") and lower ("lO w e r lOf") frequency band of
your LNB. The LOF (l
O c a l OS c i l l a t O r fr e q u e n c y ) of the LNB can be found on the LNB itself or in the
documentation of your LNB.
Band Switching•
Your SatCorder uses a 22kHz signal to change the frequency band of the LNB. If you are not sure
whether your LNB supports this function, set this option to "a
u t O ".
Primary and Secondary DiSEqC•
You can connect up to two cascadable DiSEqC switches to your SatCorder. With this option, you
can set the "t
y p e " and "in p u t " for the DiSEqC switch.
Channel ID (Unicable Only)•
In a typical Unicable LNB installation, you can connect several receivers to a single LNB if each connected
receiver has its own Unicable channel ID. Under this menu item, you can set the Unicable channel
ID of your SatCorder.
LNB Feed (Unicable Monoblock LNB Only)•
With this option, you can set which "lnb f
e e d " of a Unicable Monoblock LNB of the SatCorder should be used.
… 41 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trekstor neptune at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trekstor neptune in the language / languages: English, German as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info