485457
37
Zoom out
Zoom in
Previous page
1/60
Next page
– 36 –
– 37 –
EN
You can align the satellite antenna using a measuring device or using your television and SatCorder.
a) Connect the receiver to the LNB using a suitable coaxial cable.
b) Connect the SatCorder to your television. On your SatCorder, set a program that can be received
via the satellites being set (e.g. the program ARD in Germany for ASTRA 19.2E).
c) Adjust your satellite antenna according to the inclination being set. Many antennas already have
angle data on their mounts; otherwise, use an angle gauge to align.
d) To align the azimuth angle, turn your antenna slowly to the right or left until your SatCorder receives
a television picture. For the fine adjustment of the antenna setting, use the bar display for signal
strength and signal quality.
e) When you have found the maximum signal strength and quality, fix all the screws of your satellite antenna.
Now, as described in the "c
h a n n e l Se a r c h " section, you can look for and save television and radio channels
according to your preferences.
2.2 Connecting the Satellite Antenna
Please note: Do not connect your SatCorder to the power supply yet!
In case of a single subscriber installation, please connect your SatCorder and the universal LNB of the
satellite antenna with a coaxial cable on whose end an F-plug has been mounted. This is screwed into
the LNB in port of your SatCorder.
In case of a multi-subscriber installation, please use the coaxial cable to connect your SatCorder with
a multiswitch.
In the following, you will find information regarding important technologies for satellite systems. If
your LNB supports these technologies, you can use your SatCorder optimally.
DiSEqC (D
i g i t A l SA t e l l i t e eQ u i p m e n t co n t r o l ): For digital-ready satellite systems, DiSEqC is the standard
system for controlling several satellite positions via several LNBs or complex motorized satellite systems.
Various versions of the standard exist with various scopes of function. The satellite positions are set via the
various switching states. Depending on the DiSEqC version, four or more states are possible.
Unicable technology: Using Unicable, several satellite receivers can be supplied with an unlimited
variety of programs via a common cable to the satellite antenna. This is possible since the coaxial cable
does not carry the entire intermediate frequency band, but rather only the transponder required for the
selected program. Every satellite receiver makes its individual program selection for the LNB using special
control signals (DiSEqC). This means lower cabling costs for apartments to be equipped with satellite
television since the antenna socket can be connected in series.
37


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trekstor neptune at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trekstor neptune in the language / languages: English, German as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info