485464
40
Zoom out
Zoom in
Previous page
1/59
Next page
EN
40
6) Operating the TrekStor MovieStation
6.1) General Operation
Turning the MovieStation on or off
a
The loading or saving of the current system settings takes approx. 10 seconds when the
MovieStation is turned on or off. Do not disconnect the MovieStation from the power supply
during this process.
Turn the MovieStation on by pressing the
/ button on the MovieStation or on the
remote control.
To turn the MovieStation off again after use, briefly press the
/ button on the MovieStation
or on the remote control.
i
The color of the illumination of the / button indicates the current status of the MovieStation.
When it is blue, the MovieStation is ready to be used. It takes about 10 seconds during startup/
shutdown to load/save the system setting. During this time, the button is illuminated blue.
A red
/ button indicates that the MovieStation is in standby mode.
Adjusting the volume
You can adjust the volume during music and movie playback, during a slide show
accompanied by music, and in the settings menu. Briefly press the
a or b button to
raise or lower the volume.
i
If you hold down the a or b button, the volume changes gradually.
When you press the
ö button, you can turn the mute function of your MovieStation on and off.
Changing the video output signal
A different video output signal can be set up for the MovieStation, even though it was
correctly connected. This can distort the picture and color on your television. To change
the output signal, please proceed as follows:
a) Briefly press the "TV-OUT" button on the remote control for the MovieStation to change
the video output signal. Wait a few seconds until the MovieStation and your television
have implemented the change.
b) Repeat this process until the picture on your television is displayed correctly. The last
selected setting is automatically saved.
Main menu
The main menu is an overview, from which you can access the different functions of your
MovieStation. The main menu is displayed automatically when the MovieStation is turned on.
Press the
K or L button to mark a menu item. To select the marked menu item, press the
z button. You can return to the main menu at any time by pressing the h button.
Pressing the
M button takes you back one step at a time in the menu structure until you
have arrived back in the main menu.
i
You can open the settings menu at any time by pressing the "Setup" button. If you press the
M or the "Setup" button in the settings menu, you go back to the place you were before
opening the settings menu.
You can select from among the following menu items in the main menu:
Browser:• In "B
r O w S E r " you can access the media source from which you would like to play
the media files.
Copying:• You can use this menu item for copying your media files.
Settings:• You can configure the MovieStation under "S
E T T I N G S ".
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trekstor MovieStation Antarius PLUS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trekstor MovieStation Antarius PLUS in the language / languages: English, German as an attachment in your email.

The manual is 2,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info