485451
29
Zoom out
Zoom in
Previous page
1/34
Next page
EN
29
5) FAQ
In this chapter you receive answers to the most frequently asked questions as well as notes
about troubleshooting.
I have connected the SatReceiver to my TV. Why is no picture displayed on the screen
of my TV respective why is there no sound output?
i
That problem may have several causes. Please check the following points:
1) Please make sure, that you have chosen the right AV source on your TV or HiFi system.
2) Please check, if you have connected the correct cable for video/audio output signal.
You can find information about the right connection of the SatReceiver to your TV and
your Home Entertainment-System within the chapter "Connection with your Home-
Entertainment-System" inside that manual.
3) Even if you have connected your SatReceiver correctly, a wrong video output signal may
be adjusted. In order to change the output signal, press the green button on the remote
control. Please shortly wait until the SatReceiver and your TV have made the changes.
Repeat that process as long as the picture is displayed correctly on the TV.
I only see the message "No Signal" on the screen of my TV. What is the reason?
i
The SatReceiver has no connection to the satellite system.
1) Check the channel list, if the chosen channel is send by a satellite, to which your satellite
system is adjusted.
2) Check the satellite dish as well as the cable, which is connected to the SatReceiver.
I only see the message "No Service available". What is the reason?
i
The chosen channel is locked.
With the SatReceiver you will not able to receive locked channels (e. g. Pay-TV).
I have changed the settings of the SatReceiver but would like to get back to the
default settings.
Please carry out the action "
returN to DeFAuLt SettiNgS", which is described under "General
Operation". Hereby the SatReceiver is put back to its delivery status. All stored channel lists are
deleted when performing that action.
I have misaligned the menu language on the SatReceiver. How can I change it again?
Open the main menu by pressing the F button. Press afterwards the M button for four
times and once the L button. Then press the M button as long as the menu is displayed
again in your language.
Why does the SatReceiver switch off after a certain time period?
i
A too short time is adjusted under "Standby".
The legislator prescribes, that a SatReceiver has to be preset in a way that it switches
automatically into the standby mode after three hours, if there is no use of it. With the setting
"
StANDBy" this interval can be changed. Maybe a shorter interval was adjusted here. If you wish,
you can even deactivate the automatic cut-off by choosing "oFF" inside the "StANDBy" settings.
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trekstor Luna S2 PVR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trekstor Luna S2 PVR in the language / languages: English, German as an attachment in your email.

The manual is 1,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info