648026
6
Zoom out
Zoom in
Previous page
1/148
Next page
RIDE+ Pro Controller - Quick start
7
ENGLISH
1.2 RIDE+ Pro Controller
• Switching system On / Off
Push any of the two upper buttons to switch the system
on’. Push button to switch the system off. When
switched on, the bike is in cycle mode (zero assist).
• Assistance / Regeneration Level
Push ‘+’ button once for assistance level 1, again
for higher levels. Push ‘-’ button to go to a lower level.
Regeneration levels can be controlled in a similar way.
Push ‘-’ button once for regeneration level 1, again for a
higher level. Push ‘+’ button to reduce regeneration.
Notice: It is strongly advised to ride away in a
straight line when an assistance level is selected. Never select assistance level 3 or 4 during maneuvering
or riding away in a tight corner. The powerful reaction of motor might take you unawares.
• Switching lights On / Off
Press the button for 2 seconds to switch On / Off
the Controller display light, and, if present, the front and
rear lights. Once activated, the text ‘Light On’ or ‘Light
Off’ will appear in the lower field of the display.
• See time, average speed, odometer, trip distance
Use button to change bike computer functions
(Order of appearance: trip distance, odometer, average
speed, time). To prevent loss of riding information,
please make sure that the system is switched off
before the controller is removed from the bike.
• Using the RIDE+ Link
Most bikes with the ‘RIDE+ Pro’ controller positioned on the middle clamp are
equipped (or can be equipped) with the RIDE+ Link. This device can be used to
select a higher or lower assist or regeneration level and to turn the lights On/Off
without removing your hands off the handlebars.The red throttle button on the
RIDE+ Link is a convenient help to move the bike without pedaling (up to 4 km/h)
walking next to the e-bike.
Caution:Beware of unintended use of the throttle button when the system is switched on.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trek RIDE plus EASY II Controller at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trek RIDE plus EASY II Controller in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 9,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info