648025
25
Zoom out
Zoom in
Previous page
1/148
Next page
1
7
8
2
3
56
4
26
ENGLISH
4.4 RIDE+ EASY II Controller
1• Level indicator 2• Side button (On/Off, Light On/Off) 3• Light indicator, On or Off 4• Battery
level 5• Front +(right hand) button, Miles/Kilometer switch button 6• Front -(left hand) button,
Mode switch button 7• Distance, Odometer 8• Speed indication
Switching system On / Off
To switch the system on, push the ‘Side’ button once. The battery- pack
will emit four short beeps’ and the system will do a self-check. To
switch the system off, press the ‘Side’ button again. The battery-pack
will emit five short beeps’. There is no difference between riding with
the system ‘on’ in level ‘0’ or ‘off’. If the bike is left with the system on,
it will automatically switch off after about 10 minutes.
• Assistance/(Regeneration) Level
There are four levels of assistance. The arrows in the right top corner of
the display show in which assist-level the system is. For pedaling-
assistance, press the ‘+ (right hand)button. For assistance level 1, press
once. Press again for more assistance. Push the ‘- (left hand)’ button to
go to a lower level. When arrows in the right top corner are all outlined
only, you are pedaling a normal bicycle. When the rear brake is pulled,
the system switches to generating and two arrows on the display will
start blinking.
Regeneration levels are not installed as standard on the controller. This means that the motor will
only generate energy when the rear brake is pulled. However, if you want to, your dealer can
activate the regeneration levels. Regeneration levels can be controlled in a similar way if no level
is activated on the controller. Push ‘-’ button once for regeneration level 1, again for higher levels.
Push ‘+’ button to go to a lower level.
Notice: It is strongly advised to ride away in a straight line when an assistance level is selected.
Never select assistance level 3 or 4 during maneuvering or riding away in a tight corner. The powerful
reaction of motor might take you unawares.
• Switching lights On / Off
Press the ‘Side’ button for 2 seconds to switch On / Off the Controller
display light, and if present, the front and rear lights. Once activated,
the light symbol will appear on the screen. The lights will stay on
even when you stop. Even when the battery-gauge shows ‘empty’, there
Instructions for Use
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trek RIDE plus EASY Controller at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trek RIDE plus EASY Controller in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 9,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info