Manual Trek RIDE plus EASY Controller (page 17 of 148) (English, German, Dutch, French)

648025

Zoom out

Zoom in

1/148

ENGLISH

Instructions for Use

4. Instructions for Use

There are four types of controller: BionX G2, RIDE+ Pro, RIDE+ EASY and RIDE+ EASY II.

4.1 BionX G2 controller

1• Speed indication 2• Distance, Odometer, Chronometer, Average speed 3• Current assistance

level 4• Current generation level 5• On/Off button 6• Mode-switch

button 7• ‘+’ button 8•

‘-’ button 9• Battery level

• Switching system On / Off

Press any of the two top buttons to switch the system on.

The battery will beep four times, the system will perform a

short self-check (shown on the display as a countdown in the

‘speed’-ﬁeld), and the system will activate (switch to ‘on’).

As soon as the system is ‘on’, the screen will display and each

function will be shown next to its corresponding button.

• Same as in the Quick Start

To switch the system off, press the

button . The battery-

pack will beep ﬁve times. Riding with the system ‘On’ in level 0

is the same as riding with the system ‘Off’. If the bike is left with

the system on, it will automatically switch off after about 10

minutes. Same as in the Quick Start

• Changing the position of the buttons

Normally, the On/Off button

and the mode-switch

button are on the right, and the ‘+’ and ‘-’ buttons on the left.

The functionality of the buttons can be swapped right-to-left.

The code to access this is 2009. More information about

programming via the controller can be found later in this

manual.

• Assistance

When the motor provides power, the bicycle is in assistance

mode. There are four levels of assistance. The level of

assistance is shown by the bar graph on the right, below the

digits for speed. The narrow graph on the display shows the

amount of energy delivered to the motor.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Trek RIDE plus EASY Controller in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 9,86 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Trek RIDE plus EASY Controller Manual

Product: