648025
11
Zoom out
Zoom in
Previous page
1/148
Next page
Contacts at the bottom side of the down tube
1. 2. 3.
5.4.
1. 2.
3. 4.
12
ENGLISH
Quick start - Down Tube Battery
1.7 Down tube Battery (RIDE+ C320, RIDE+ C420)
• Removing the battery-pack
Insert the key in the lock, twist the key clockwise until the lock springs out (1,2). When the lock
springs out, the lever of the battery will be released. Now take the key from the lock and pull the
lever of the battery so that it slides upwards - parallel to the down tube - until it releases from the
rail (3). When the battery is not on the bike, always use the protective cover on the contacts on the
frame to protect the electrical system from water (5).
• Replacing the battery-pack
Position the battery over the down tube (with some space between the seat tube and the lower end
of the battery) (1). Now, slide the battery-pack down onto the rail (2). Use the lever to lower the
battery carefully during the last phase of sliding, so that the connectors engage (3). Be sure that
the connector at the bottom of the battery and the connector on the docking engage properly.
When the battery is fully in place, push the lock in until it clicks (4). Do not ride the bike with the
lock open.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Trek RIDE plus EASY Controller at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Trek RIDE plus EASY Controller in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 9,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info